Showing posts with label dogs. Show all posts
Showing posts with label dogs. Show all posts

5 Pack Dremel 407 1/2" Sanding Drum 1/8" Shank Review

5 Pack Dremel 407 1/2 Sanding Drum 1/8 Shank
Average Reviews:

(More customer reviews)
I use these sanding drums in my hobby of Model ship building. They are great at low speeds for sanding away the flash found on many plastic model parts. IOn fact. They can be used basically for all your sanding needs. These drums last long and are very strong. Another Great Product from Dremel Power Tools and attachments.
Thank You

Click Here to see more reviews about: 5 Pack Dremel 407 1/2" Sanding Drum 1/8" Shank

Dremel 407 A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. The replaceable band covering the cylinder is coarse 60 grit. Ideal for rough-shaping land smoothing wood and fiberglass-as well as removing rust from metal surfaces, shaping rubber surfaces and more

Buy Now

Click here for more information about 5 Pack Dremel 407 1/2" Sanding Drum 1/8" Shank

Read More...

30 TOUGH Diamond Burs 40 Grits Jeweler Tool for Dremel Review

30 TOUGH Diamond Burs 40 Grits Jeweler Tool for Dremel
Average Reviews:

(More customer reviews)
I purchased these for my Dremel, thinking I was getting a great deal for the set. They are supposed to be diamond tipped burs for working with glass, ceramic, and stone. I purchased them to use with glass. Compared to the one diamond tipped Dremel brand bit that I already had, these didn't even compare. I did a simple test of trying to drill a small hole in a piece of glass. I used water to cool the heat of friction created by the spinning bit. The Dremel bit worked great and made a nice neat little hole in my glass. The bits from this set performed horribly. They wouldn't even go through a thin sheet of stained glass. They each overheated to the point where the tip glowed red and caused the glass to crack. Before the bit even made it through the glass, the diamond tipping actually came off so that the end of the bit was bald. I thought maybe I had a defective tip, so I repeated the same experiment with some more of the drilling bits with the same results. This was such a poor quality product that I just threw the rest of them away. If you think you're getting all these bits for a great deal, stop and think what purpose you really need diamond tipped bits for, then invest in one or two good quality tips from Dremel, itself. You'll get a much better quality product.

Click Here to see more reviews about: 30 TOUGH Diamond Burs 40 Grits Jeweler Tool for Dremel

30 TOUGH Diamond Burs (40 Grits) SetThis set is ideal for grinding, cleaning, cutting, polishing, etc This bits are coated with tough diamond particle This product is perfect for jewelers, hobby & craft, modelers, and other professions This set will last a long time, and you won't be disappointed This set comes in a protective plastic case for convenience The case is approximately 5 5/8" long by 2 7/16" wide You will receive 30 different types of these tough bits for your Dremel machine

Buy Now

Click here for more information about 30 TOUGH Diamond Burs 40 Grits Jeweler Tool for Dremel

Read More...

Black & Decker RTX-6 2 Amp 3-Speed Rotary Tool with 30 Accessories and 2 Spring Clamps Review

Black and Decker RTX-6 2 Amp 3-Speed Rotary Tool with 30 Accessories and 2 Spring Clamps
Average Reviews:

(More customer reviews)
I haven't used this on any projects yet, but it does seem promising. It has a rigid feel to it and the price is ideal. I haven't used a Dremel brand rotary tool so I can't really compare.
The only negative thing I have to say about this is that the collet nut is pretty hard to loosen once it's tightened. However, I found that putting the wrench against one of the fan blades made it easier to loosen. Probably not a good thing to do, but it does work.
Update 10/14/2008: I have used this on several projects now and it has held up very well. Cuts, grinds, and sands plastic and metal with no problems. The cut-off wheels included are not that great, but you can always get reinforced replacements. Also, make sure to let off on the material you are cutting, grinding, or sanding from time to time so that the cut-off wheels or sanding bands can cool off. Otherwise, the cut-off wheels are more prone to shatter or burn the material when it gets too hot from the friction. If you think you need a rotary tool to get a job done, this will do it and then some. In my initial review I stated that I had problems with the collet nut, but after using it I found it was my own fault. I did not have the locking safety mechanism engaged all the way so I had problems getting the collet nut off. Just make sure the safety is engaged all the way and tap the collet when it is loosened to get the attachment off and you will be golden. I am happy that I bought this for about half as much of a Dremel brand rotary tool. If I could change my rating, I would now give it 5 stars.
Amazon doesn't include a list of the accessories, but it's not their fault. It doesn't even say on the box itself. For those wondering what this comes with:
Rotary Tool - 1
Carrying Case - 1
Woodworking Clamps - 2
Wrench/Flathead Screwdriver - 1
1/8" Standard Mandrel - 1
Sanding Drum Mandrel - 1
Rubber Polishing Wheel (Coarse) (Brown) - 1
Aluminum Oxide Stone Bullet (Brick) (For Grinding) - 1
Diamond Point (For Engraving) - 1
Heavy Duty Cut-Off Discs - 20
Sanding Band (Coarse) - 3
Sanding Band (Fine) - 2

Click Here to see more reviews about: Black & Decker RTX-6 2 Amp 3-Speed Rotary Tool with 30 Accessories and 2 Spring Clamps

The Black & Decker RTX-6 2 Amp 3-Speed Rotary Tool offers superior power and versatility, allowing you to perform a wide variety of jobs with maximum convenience. Its high-torque 2 Amp motor gives you enough power to complete jobs faster than most other tools on the market and without getting bogged down, and with three adjustable speeds (12,000/24,000/30,000 RPM) this tool delivers precision work. Rubber overmolded grips offer comfort, protection, and greater control. This rotary tool also comes with 27 accessories and 2 clamps to perform a wide variety of tasks--cutting, sanding, grinding, carving, polishing, and much more--and for the maximum in convenience, it features a universal collet system to accept any standard rotary tool accessory. Its exclusive "Flip-Lock" system makes switching between accessories quick and easy. The rotary tool also includes a wrench, two clamps, and a soft-sided bag with room for accessories. It is covered by a two-year warranty.

Buy NowGet 54% OFF

Click here for more information about Black & Decker RTX-6 2 Amp 3-Speed Rotary Tool with 30 Accessories and 2 Spring Clamps

Read More...

Dremel 438 1/4" 120 Grit Sanding Bands 6 Pack Review

Dremel 438 1/4 120 Grit Sanding Bands 6 Pack
Average Reviews:

(More customer reviews)
On 08/06/2008, I purchased these sander bands at the same time I purchased the Dremel 750-02 Minimite 13,000 RPM 2 Speed 4.8-Volt Cordless Rotary Tool. However the sander bands do not fit this tool. Amazon's Web-site did not clearly state otherwise.
MCox, San Diego, CA

Click Here to see more reviews about: Dremel 438 1/4" 120 Grit Sanding Bands 6 Pack

Dremel Set of six, 1/4" Fine Sanding Bands. Ideal for rough-shaping and smoothing wood and fiberglass as well asremoving rust from metal surfaces, shaping rubber surfaces and more.

Buy Now

Click here for more information about Dremel 438 1/4" 120 Grit Sanding Bands 6 Pack

Read More...

Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool Review

Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool
Average Reviews:

(More customer reviews)
My dog's breeder recommended this model to use for keeping the dog's nails trimmed. Absolutely perfect for filing down her nails. I always put on a pair of gardening gloves (you know how puppies and dogs wiggle) and this cordless wonder works GREAT. Good price, great work. A very good buy.

Click Here to see more reviews about: Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

Compatible with any Dremel accessory, the Dremel 750-02 MiniMite rotary tool is an ultra-portable, cordless rotary tool that can tackle just about any household, hobby, or small crafting job you can dream up. This compact, two-speed device drills, sands, shapes, details, and performs minor repair work at home, in the shop, or wherever and whenever you need a little extra help.
Lightweight Design for Intricate WorkMeasuring eight inches long and weighing just nine ounces, the 750-02 MiniMite is lightweight and easy to hold, making it ideal for more detailed, delicate work like beading, polishing small stones, drilling in glass, or sanding and assembling smaller pieces such as dollhouse furniture. And with two settings of 10,000 RPM and 13,000 RPM, this tool can accommodate tasks like taking burrs off metal, repairing electronic devices, making cutouts in hard materials like ceramic and tile, or even trimming your dog's toenails.
Straightforward, Cordless OperationOperation is simple, thanks to a straightforward on/off switch and the streamlined, cordless design--great for getting to even hard-to-reach places. The 750-02 MiniMite also recharges quickly and emits only a low level of noise to cut down on distraction--and to help keep your pet calm if you're trimming its nails! Additionally, it maintains its stability as it works to help you keep hold of small materials like beads while polishing or shaping them.
The 750-02 MiniMite comes with the rotary tool and rechargeable 4.8-volt battery, sanding drum, small felt wheel, fine sanding band, and carbide stone. This tool is backed by a two-year warranty.
What's in the BoxRotary tool with battery, sanding drum, small felt wheel, fine sanding band, carbide stone, and three-hour battery charger.

Buy Now

Click here for more information about Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

Read More...

Dremel 761-03 Cordless Pet Nail Grooming Rotary Tool Review

Dremel 761-03 Cordless Pet Nail Grooming Rotary Tool
Average Reviews:

(More customer reviews)
I love the Dremel Nail Groomer! It is a veritable dream to use when compare with dog nail clippers because there is no danger of clipping the quick. Here are a few things of note:
1. Some dogs don't like the sound, not a problem for my pups but something you might want to think about. Do not use it on Fluffy until they are comfortable with the sound. You can use lots of treats to encourage proximity if needed. When Fluffy ignores (or better yet investigates) the Dremel your good to go.
2. Have lots of treats handy (I use a high quality, small bite dog food as cheap treats-adjust regular feedings if needed). Treat Fluff often until they get use to the feel.
3. Use low speed and make early sessions short. One paw or so.
4. Sand in short, 1 or 2 second burst to prevent uncomfortable heat build up from the friction and to avoid the possibility of sanding off too much nail (the latter hasn't been a problem for me so far, but I have run into the former and the dog didn't like it).
5. Expect nail dust.
6. On low, accidental sanding of fingers feels funny but doesn't hurt! (Yep I've done it... lots. I haven't needed high speed, so don't know its effect.)
7. Two words: Rechargeable Batteries (Energizer NiMHs Rock)!! I'm not having the battery problems others are complaining about. With two medium sized dogs and several months of twice monthly trims I've only changed the batteries once. If you don't get rechargeable get batteries intended for high power consumption electronics.

Click Here to see more reviews about: Dremel 761-03 Cordless Pet Nail Grooming Rotary Tool

Make grooming your pet's nails a safe, fast, and calming experience with the Dremel 761-03 Cordless Pet Nail Grooming kit. Because it grinds nails rather than cutting them, this handy tool helps prevent bleeding nail beds, cracked nails, or nicks. At the same time, the 761-03 is quiet enough that its noise soothes rather than startles a nervous pup.
Save Time, Money, and StressGrooming your pet doesn't have to mean expensive trips to a professional or noisy tools that terrify your pet. Instead, the Dremel 761-03 Cordless Pet Nail Grooming kit saves both money and stress by giving you the option of taking care of your pet where he is most comfortable--at home. In fact, with this tool you can grind nails whenever your pet is most relaxed, or quickly groom him a little each day so his nails stay clean and healthy.
Lightweight, Easy-Maneuver DesignWeighing less than one pound, and featuring durable yet lightweight plastic housing, the Cordless Pet Nail Grooming kit is easy to handle and hold, even if your pet is squirming. It's also a snap to maneuver, allowing you to access your pet's nails from a variety of different angles. And you'll never have to worry about cords getting in the way or tangling around your dog; the Dremel Cordless Pet Nail Grooming kit conveniently takes four "AA" batteries (not included).
Pet and User FriendlyThe Dremel 761-03 Cordless Pet Nail Grooming kit is both user- and pet-friendly. More efficient than a file, and safer than traditional cutters, it delivers quick, pain-free results. When you first introduce the tool to your pet, simply turning it on and running it for a few minutes gives Champ the chance to get used to the sound. Start with a low speed and trust the rotary action to gently sand nails. And keep in mind that during the first few sessions, you can opt to sand in short bursts, alternating from paw to paw, both to make sure each nail has a chance to cool down and to keep your pet comfortable.
To make the grooming experience as pleasant as possible, the Dremel 761-03 Cordless Pet Nail Grooming kit includes five grinding drums as well as a wrench for changing them. It is backed by a two-year warranty.
What's in the Box6.0-volt alkaline cordless rotary tool, five grinding drums, and wrench.

Buy NowGet 33% OFF

Click here for more information about Dremel 761-03 Cordless Pet Nail Grooming Rotary Tool

Read More...

Dremel 432 1/2" 120 Grit Sanding Bands 6 Pack Review

Dremel 432 1/2 120 Grit Sanding Bands 6 Pack
Average Reviews:

(More customer reviews)
I purchased the Dremel Rechargeable Rotary Sander to use for my dog's nails. Great tool! I also purchased the fine bands and the coarse bands. The coarse bands did a much better job at grinding down my dog's nails. I have a large dog with thick nails, so the fine bands worked, but it took much longer and they wore out much quicker than the coarse bands. If you have a small dog with thin nails the fine bands will probably work fine.
I will try to find these at a local hardware, because shipping is too expensive for such a small package.

Click Here to see more reviews about: Dremel 432 1/2" 120 Grit Sanding Bands 6 Pack

The Dremel 1/2-Inch Sanding Band is ideal for rough-shaping and smoothing wood and fiberglass, as well as removing rust from metal and shaping rubber surfaces. This cylinder sanding band is covered with fine 120-grit aluminum oxide abrasive. This purple sanding band is easily replaceable and comes in a pack of six.

Buy Now

Click here for more information about Dremel 432 1/2" 120 Grit Sanding Bands 6 Pack

Read More...

Dremel 687-01 52-Piece General Purpose Rotary Tool Accessory Kit With Case Review

Dremel 687-01 52-Piece General Purpose Rotary Tool Accessory Kit  With Case
Average Reviews:

(More customer reviews)
This kit has just about everything you need for cleaning and polishing anything small and delicate. I've used the various tools to clean electrical contacts and car battery poles and watches while changing batteries, and the rotary sandpaper is perfect on the dog's nails. I gave it 4 stars because it could have included a brass brush (which I bought separately) and they supplied only one polishing compound which produces a high luster finish, but not a mirror finish. I recommend testing each tool on something out of sight or of little value before using it on anything good. But, if each tool in the kit were bought separately, it would have cost 4X as much. All in all, it's a very good deal. Delivery was ahead of schedule, and that's a good thing too!

Click Here to see more reviews about: Dremel 687-01 52-Piece General Purpose Rotary Tool Accessory Kit With Case

52 Piece, General Purpose Set, Contains Everything Needed To Cut, Carve, Sand, Grind, Clean & Polish, Plus More.

Buy NowGet 28% OFF

Click here for more information about Dremel 687-01 52-Piece General Purpose Rotary Tool Accessory Kit With Case

Read More...

Dremel 7700-1/15 MultiPro 7.2-Volt Cordless Rotary Tool Kit Review

Dremel 7700-1/15 MultiPro 7.2-Volt Cordless Rotary Tool Kit
Average Reviews:

(More customer reviews)
I bought it for my dog's nails. It arrived yesterday morning just after I started trying to fix the tiles in the shower - who were put in by a moron. Two were shoved so closely together that there was no room for grout and water leaked in rotting the wall board. I didn't know what to do since it meant cutting a tile to fit - something I don't know how to do. I thought of the Dremel, and used it to grind down one of the tiles. It worked and saved the day! If it will grind down about 1/4" off a ceramic tile without breaking a sweat I imagine it will do most anything I need it to do.

Click Here to see more reviews about: Dremel 7700-1/15 MultiPro 7.2-Volt Cordless Rotary Tool Kit

Ready to go at a minute's notice, the Dremel 7700-1/15 MultiPro Cordless Rotary Tool Kit is perfect for a variety of hobby, craft, and light-duty home improvement projects. The two-speed rotary tool is capable of doing almost anything the standard MultiPro does, but with cordless convenience. The kit comes with a carrying case, battery pack, charger, one attachment, and 15 accessories that give you the option of cutting, grinding, sanding, polishing, routing, drilling, and carving--so you'll be ready to tackle whatever project you dream up next.


Buy NowGet 42% OFF

Click here for more information about Dremel 7700-1/15 MultiPro 7.2-Volt Cordless Rotary Tool Kit

Read More...

Dremel 7300-N/8 MiniMite 4.8-Volt Cordless Two-Speed Rotary Tool Review

Dremel 7300-N/8 MiniMite 4.8-Volt Cordless Two-Speed Rotary Tool
Average Reviews:

(More customer reviews)
Love the new Dremel! It's a great little tool. We originally purchased it because I wanted to carve "Funkins" for Halloween rather than a real pumpkin. We did use it for that and it worked great. We also used it for our dog's nails and it worked great for that too. She isn't fond of having her nails clipped so this was a better choice. It wasn't as invasive and if you just take your time it's pretty gentle.

Click Here to see more reviews about: Dremel 7300-N/8 MiniMite 4.8-Volt Cordless Two-Speed Rotary Tool

Add the finishing touch with the lightweight Dremel 7300-N/8 MiniMite cordless two-speed rotary tool. Thanks to its compact size and comfortable soft grips, the rotary tool helps you keep a steady hand while you work. Featuring two speeds and eight different accessories, this tool is ideal for a variety of delicate tasks that are too small for bulky machines. And it's built for efficiency, too: if you need to change accessories in the middle of a job, use the included wrench for a quick switch. The battery can be easily removed from the housing and can be fully charged with a few hours.
Built to be Compact and ComfortableThanks to its lightweight design, the Dremel MiniMite cordless two-speed rotary tool is ideal for working on delicate projects. Weighing 1.4 pounds, this tool features a pencil-grip nose and soft-grip sides for secure handling. Because it's only eight inches long, it is comfortable to hold and use for as long as you need.

Multiple Attachments and Speeds for All Your Project NeedsIncluded with the Dremel 7300-N/8 rotary tool are three sanding drums, a felt wheel, sanding band, mandrel, and silicon carbine stone. The included wrench makes changing accessories quick and easy.

The blue switch on the housing lets you move from low to high speed, while the separate off option helps you avoid accidentally changing speed settings while you work. Because this tool offers two different speeds, you're able to fully control the accuracy--and outcome--of your work.

Cordless for ConvenienceNo more searching for power outlets--this tool gives you 4.8 volts of battery power, so you can work wherever you need to. The battery pack can be removed from the housing and popped into the charger--the rotary tool will be ready to go within three hours. As an added convenience, a bright LED indicates when the battery has been properly placed on the charger.

The Dremel 7300-N/8 MiniMite cordless two-speed rotary tool is backed by a manufacturer's limited two-year warranty.




Buy NowGet 41% OFF

Click here for more information about Dremel 7300-N/8 MiniMite 4.8-Volt Cordless Two-Speed Rotary Tool

Read More...