Showing posts with label tools. Show all posts
Showing posts with label tools. Show all posts

Scotch Brite Green #150 Grit Review

Scotch Brite Green #150 Grit
Average Reviews:

(More customer reviews)
Although the photo shows approximately 20-25 pieces, you only get 10. Quality seems somewhat mediocre. Had there been 20-25 pieces then it might have been an acceptable value for the price. Avoid the disappointment, buy the Dremel parts.

Click Here to see more reviews about: Scotch Brite Green #150 Grit

25 Scotch Brite, Green, #150 Grit, all with 1/8" Shank. VERY good for removing paints, oxidation, scouring. Many uses. Also available in larger quantities.

Buy Now

Click here for more information about Scotch Brite Green #150 Grit

Read More...

Rotozip 101225 Revolution Spiral Saw Kit Review

Rotozip 101225 Revolution Spiral Saw Kit
Average Reviews:

(More customer reviews)
This tool has come in very handy for me and my workers. It's been great for removing cracked ceramic tile in showers (using masonary disk), cutting stucco, etc. If you get one, make sure you ALWAYS wear safety goggles. The one time I didn't I had a piece of stucco hit my eyeball and it was extremely painful (am fortunate it hit the white part of the eye).
What I dislike about this tool is the on/off switch. It is so bad that I could see someone having an accident with it. The switch is a slippery piece of plastic that you have to pull to turn it on and it's not easy to get a grip on.
I also don't like the cheesy plastic case. The mfg. should include a metal case or at a minimum a quality plastic case.
I haven't had great luck with the bits (they always seem to break).
Even though there are a couple negative things about this tool, I would definitely buy it again. It has become indispensable to me and gets used regularly in renovating apartment units.

Click Here to see more reviews about: Rotozip 101225 Revolution Spiral Saw Kit



Buy Now

Click here for more information about Rotozip 101225 Revolution Spiral Saw Kit

Read More...

Proxxon 28620 Flexishaft Micromot 110/ P with 6 Micromot Collets Review

Proxxon 28620 Flexishaft Micromot 110/ P with 6 Micromot Collets
Average Reviews:

(More customer reviews)
All I can suggest is that you do not buy this product. I purchased this for use with the Proxxon 38481 IB/E Professional Rotary Tool, which is great. The tool runs smooth and does not get hot, even when in use for hours. The flexishaft, however when using this flex shaft, it rattled, vibrated, and heated up within a minute. Even with the most delicate work, I would rather use the tool without.

Click Here to see more reviews about: Proxxon 28620 Flexishaft Micromot 110/ P with 6 Micromot Collets

Proxxon Flexishaft MICROMOT 110/P - Converts your Proxxon Rotary Tool into a Flexible Shaft Machine - industrial quality Flexishaft - extremely flexible. With triple ball bearings and speeds up to 25,000 rpm. Sometimes even Proxxon's slim and compact designed hand-held power tools are too ""bulky"". This is when our highly flexible Flexishaft is the solution. It is easily to be attached to any of our rotary tools, either to Proxxon's Precision Rotary Tool FBS 115/E or the Professional Rotary Tool IB/E or our lightweight Rotary Tools MICROMOT 50 and 50/E in pen style design, which will hold the flexishaft's coupling piece with the collet size 7/64'' (3.0 mm).

Buy NowGet 4% OFF

Click here for more information about Proxxon 28620 Flexishaft Micromot 110/ P with 6 Micromot Collets

Read More...

RotoZip DR01-1100 Drywall Router with Soft Handle, 2 XBITS, Bit Case & Collet Accessory Pack Review

RotoZip DR01-1100 Drywall Router with Soft Handle, 2 XBITS, Bit Case and Collet Accessory Pack
Average Reviews:

(More customer reviews)
I got this for a great price. And that was the only reason I like it. I found it really hard to control and make straight cuts with it. And that was even in 5/8" drywall. Sometimes it would cut smoothly through the drywall, other times it would struggle. I know why it does it, but it seems silly to me. I didn't care so much about this because the project I bought this for didn't require me to have straight cuts anyway. I was cutting holes in the drywall just to be able to get a drill inside the wall.
The thing makes a huge mess as well. The inevitable drywall dust blows EVERYWHERE because there's a fan inside the saw that blows dust away from the bearings. The sliding bracket that controls cut depth leaves black marks all over the surface you're cutting. They came off easily enough, but really?
The thing that drove me crazy was the fact that the attachments that RototZip makes DO NOT work on this saw. I bought a circle cut guide that said it worked on every RotoZip spiral saw (read the fine print, dummy!). But not this one.
I see that Dremel is coming out with a multi-role device for $99. So far it looks like the best deal. But if you're just looking to make quick, not-so-straight cuts then this will work for you.

Click Here to see more reviews about: RotoZip DR01-1100 Drywall Router with Soft Handle, 2 XBITS, Bit Case & Collet Accessory Pack

The drywallers of America have spoken--and they asked for a router that is small, short, fast, and durable. RotoZip answered the call with the DR1-1100 Drywall Router Kit. The innovative DR1 router has a lightweight, compact design with all the power and reliability professionals need to tackle heavy-duty jobs. And with on-tool wrench storage, depth guide, replaceable motor brushes, and more, the DR1 ensures you'll get your cut-out work done efficiently and easily.
Big Power in a Small PackageWeighing in at only 2.8 pounds and measuring 7.5 inches in length, the DR1 drywall-specific router is easy to hold and packs a significant punch. Custom created for drywallers by drywallers, the DR1 is 20 percent shorter and features a smaller grip diameter than its competitors, providing enhanced cutting capabilities and control while minimizing user fatigue.
Even with its small size, the DR1 doesn't skimp on power. In fact, at 33,000 RPM versus the competition's 30,000, the DR1 is the fastest spinning drywall tool on the market. And, its six amps of power deliver up to 45 percent higher speeds under load than other models, providing more power to cut around large areas such as windows and doors. And thanks to overload protection, you can be sure the DR1 will operate smoothly every time you use it.
Chock-Full of User-Friendly FeaturesThe DR1 is packed with user-friendly features to help you complete your cut-out work efficiently. To start, a handy on-tool wrench storage compartment simplifies bit changes, and replaceable motor brushes and available service parts reduce downtime. For further convenience, the DR1 has a smart venting system that keeps dust away from you for a healthier, safer working environment.
Additionally, the DR1 features revamped XBITS that are capable of cutting more than 2,000 feet of drywall, a redesigned depth guide that allows for maximum visibility, and a durable, hardened steel lock pin encased in solid aluminum to prevent the shaft lock from breaking.
The DR1-1100 Kit comes with one 1/8-inch collet and nut, one 5/32-inch collet and nut, and 1/4-inch collet and nut. The drywall router can also be used with Zip Bits.
Durable Construction Withstands Tough JobsThe DR1 Drywall Router is built to last. For starters, a metal reinforced shaft lock, metal bearing plate, and hand polished, die-cast aluminum front housing ensure optimum durability for longer life.
Also, a low-profile hardened steel depth guide and fiberglass stainless steel reinforced body combine with a contractor-grade high-strand rubber cord to stand up to rough-and-tough conditions. A heavy-duty on/off switch is dust sealed to protect the tool from damaging particles.
About RotoZipRotoZip was founded in 1972 when a professional drywall contractor sought a better, faster way to cut drywall. Focused on saving time and money while improving his results, this single vision soon spawned a complete line of high performance professional tools, accessories and attachments for cutting a wide variety of building materials. Today, RotoZip continues to build upon the same strong foundation established over two decades ago as the world's number one Spiral Saw system.
What's in the BoxDR1-1100; adjustable strap; two Drywall XBITS; three collets/nuts: 1/8-inch, 5/32-inch, and 1/4-inch; accessory case; and wrench.


Buy NowGet 48% OFF

Click here for more information about RotoZip DR01-1100 Drywall Router with Soft Handle, 2 XBITS, Bit Case & Collet Accessory Pack

Read More...

NuLine ECV-3 3" Cross Slide Vise Nuline Drill Press Vise Review

NuLine ECV-3 3 Cross Slide Vise Nuline Drill Press Vise
Average Reviews:

(More customer reviews)
The vise is so far out of square it is unusable! Would not ever purchase again!

Click Here to see more reviews about: NuLine ECV-3 3" Cross Slide Vise Nuline Drill Press Vise

Cross Slide VisesType: Cross VisesJaw Width: 3Jaw Opening: 3-1/4Throat Depth: 1-1/16

Buy Now

Click here for more information about NuLine ECV-3 3" Cross Slide Vise Nuline Drill Press Vise

Read More...

Black & Decker RT550M Wizard Variable Speed/High Torque Rotary Tool with 101 Accessories Review

Black and Decker RT550M Wizard Variable Speed/High Torque Rotary Tool with 101 Accessories
Average Reviews:

(More customer reviews)
The only way to review this product is by comparing it with a similar Dremel model. For the price, the Wizard stacks up very well. The biggest discrepancy is in the rpms. The Dremel tool can produce up to 30,000rpms compared to only 24,000rpms for the Wizard. At max speed however, the Wizard seems to perform perfectly well. The difference is not all that noticeable. I used the Wizard for a variety of tasks and was able to perform each one easily and efficiently.

Click Here to see more reviews about: Black & Decker RT550M Wizard Variable Speed/High Torque Rotary Tool with 101 Accessories



Buy Now

Click here for more information about Black & Decker RT550M Wizard Variable Speed/High Torque Rotary Tool with 101 Accessories

Read More...

Proxxon 38635 Complete Engraving Kit with Trial Glass Review

Proxxon 38635 Complete Engraving Kit with Trial Glass
Average Reviews:

(More customer reviews)
As with most Proxxon tools it is well made and performs as advertised. Its collet, which cannot be changed, holds only one diameter shaft. This limitation, along with the inconvenience of a power cord causes me to only use this tool for a few applications.

Click Here to see more reviews about: Proxxon 38635 Complete Engraving Kit with Trial Glass

The kit comes with the tried and tested high speed engraving tool GG 12 (12-18V, 20,000 rpm, fitted in a ball bearing assembly) powered by the included AC adapter (12V, 0.5A), patterns and instruction booklet as well as all necessary bits: 1 each 1/32" and 5/64" (1.0 and 1.8 mm) diamond grinding bits with spherical head for engraving and line work as well as 1 each silicon carbide grinding bits in both conical and bullet shape for frosting glass. Carve and engrave the finest details in metal, wood, plastic and glass. For more details on the tool see Engraving Tool GG 12 - 28592. Note: The unit requires a 12 V power source. Please see our AC Adapters NG 2/S and NG 5/E for details. Proxxon tools come with a 2 year factory warranty.

Buy NowGet 5% OFF

Click here for more information about Proxxon 38635 Complete Engraving Kit with Trial Glass

Read More...

GROUT GETTER: GRS210-P Carbide Grout Removal Kit (3 in 1) Review

GROUT GETTER: GRS210-P Carbide Grout Removal Kit (3 in 1)
Average Reviews:

(More customer reviews)
The job I did was for a ceramic tile shower with 1/8" grout lines. I wanted to completely re-grout the stall. This tool was only useful after I used a dremel tool (1/16" bit, which also burns up too quick) to route out the lines. The diamond shaped bit easily "pushes" the remaining edge grout right off. Don't think you can use it to remove to a decent depth without small chipping of the tile edges. Also Horizontal lines are harder to do with the knife edged blade. You have to pull it across the line. What happened to me was I hit a pocket in the grout line which caught the blade and chipped a big piece off. Now that tile needs to be replaced. Luckily I have an extra from the previous homeowner. I would imagine the "lathe" style triangle bit would perform the same in a 1/4" line. In a perfect world, it might work fine. But then again... Definitely not a tool for pro's. Here's my advice: Hire a pro with a Fein tool, rent one, or re-tile. Re-grouting is a dusty,sucky and time consuming job.

Click Here to see more reviews about: GROUT GETTER: GRS210-P Carbide Grout Removal Kit (3 in 1)

Grout Getter's GRS210-p Kit does it all! Includes the new model Grout Getter with the triangle shape carbide blade for sanded grout joints, an extra diamond shape carbide blade for non sanded grout joints, a changing wrench and the new patent pending Corner Pro for those hard-to-get tile and stone grout areas. For grout joints 1/8" and wider use the triangle blade to rip the grout out. For joints 1/8" and smaller use the diamond shape blade. Then use the Corner Pro tool to remove grout out of corners, edges, around sinks, cabinets, counters and difficult angles. Be careful with power tools that can ruin your tile. Get the tool the pros in the industry use- get the Grout Getter!

Buy NowGet 19% OFF

Click here for more information about GROUT GETTER: GRS210-P Carbide Grout Removal Kit (3 in 1)

Read More...

SE Mini Grinder w/ Flexible Wire and 40Pcs ACC 110V, Black- Review

SE Mini Grinder w/ Flexible Wire and 40Pcs ACC 110V, Black-
Average Reviews:

(More customer reviews)
I would recommend against purchasing this item.
I purchased mainly for the flex shaft, as I already owned a Dremel brand rotary tool.
To use the flex shaft, you unscrew the front part of the rotary tool, then screw the extension shaft onto the tool. The threads are the same size for this tool and for the dremel brand.
Inside the flex shaft, there is a thing that turns - kind of like a cable, I assume. At the end of the flex shaft that connects to the rotary tool, there is a square rod that goes into the rotary tool in the same place where you'd normally put bits into the rotary tool.
However, it is not possible to tighten the collet and the collet nut around the square rod.
Furthermore, even if you could tighten the collet around the rod, you can't pull the rod out of the flex shaft in order to get a tight fit before screwing the shaft onto the rotary tool.
It is supposed to work like this: you don't use the collet, and there is supposed to be a collet nut with a square hole that the square rod fits into. THIS SET DOES NOT HAVE THIS IMPORTANT PART! Consequently, you can not use the flex shaft that comes with this kit.
To make things even more interesting, the diameter for the collet nut on this rotary tool is a different size than on the Dremel brand! So even if you shell out 3 or 4 bucks for the Dremel square collet nut driver, it won't fit on this.
The only way you can use the flex shaft is if you happen to have a dremel brand rotary tool and you get a square collet nut driver. You won't be able to use the flex shaft on this rotary tool.
I tried to talk with the seller about getting a collet nut driver, but they wouldn't supply one or cover the cost of one, and insisted that I pull out the square rod from the flex shaft (NOT POSSIBLE!) and use the normal collet and collet nut for circular rotary tool bits with the square shaft.
Do not buy this item. And beware of their customer service. Other items shipped from this seller were satisfactory and arrived as described, but seller refused to resolve the issue of this incomplete and therefore defective item.

Click Here to see more reviews about: SE Mini Grinder w/ Flexible Wire and 40Pcs ACC 110V, Black-



Buy NowGet 38% OFF

Click here for more information about SE Mini Grinder w/ Flexible Wire and 40Pcs ACC 110V, Black-

Read More...

Factory-Reconditioned RotoZip RZ01-1100-RT Spiral Saw with 3 Bits Review

Factory-Reconditioned RotoZip RZ01-1100-RT Spiral Saw with 3 Bits
Average Reviews:

(More customer reviews)
Bought this item to cut Hardboard and tile on my bathroom remodel. It arrived quickly and was out of the box and cutting in short order. It was easy to setup and use. Sight through the guide was no problem. I could follow the cut in progress O.K. Changing bits is fast and easy although I did have to use the supplied wrench to tighten the bit, hand collet was not always tight enough, no problem. I felt the power on this unit was more then required for the job. It never slowed even in the tile, which it cut like butter---really! It took the work out of work for me. Good price and I didn't need a box to keep it in so why pay for one. It was as advertised.

Click Here to see more reviews about: Factory-Reconditioned RotoZip RZ01-1100-RT Spiral Saw with 3 Bits

This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. The RotoZip RZ01-1100-RT 5 amp Spiral Saw allows for fast free hand cuts through ceramic tile, cement board, drywall, wood and a variety of other materials. 3 -jawed chuck for quick easy bit changes. Soft band handle provides comfortable use. Includes 3 bits and wrench. Bosch reconditioned product carries a 1 year warranty. Includes RotoZip Base Kit - RZ01-1100, Bit Accessory Pack, Wrench

Buy NowGet 63% OFF

Click here for more information about Factory-Reconditioned RotoZip RZ01-1100-RT Spiral Saw with 3 Bits

Read More...

Milescraft 1008 Roto 90 Right Angle Attachment Review

Milescraft 1008 Roto 90 Right Angle Attachment
Average Reviews:

(More customer reviews)
This attachment allows the Black & Decker RTX to become a much more useful tool. It also allows for more precise control because you will have better places to put your hands.
The instructions use pictures to illustrate fitment. I found the visual representations confusing - a few words would have made the job far easier.
Nevertheless there are not that many parts and you should be able to figure out how to install your 90 degree attachment.
The one problem that I had was that the collet from the RTX didn't fit into the Roto 90's business end.
I used an 11/64ths bit in a cordless drill to carefully ream the receiver. That solution worked perfectly.
There is a 1/8 locking hole built into the Roto 90 that should be used for tightening the collet instead of relying on the RTX's shaft lock.
The drag created by the 90 does cause the RTX to run hotter. If you feel that your RTX is becoming too hot - stop working and allow it to cool down.
When in operation this attachment is worthy of 5 stars -
Issues with fitment forced me to subtract 1 star.
caslo

Click Here to see more reviews about: Milescraft 1008 Roto 90 Right Angle Attachment

MilesCraft 1008 Roto90 Right Angle Attachment. Get around corners and into tight spaces with your rotary tool. Includes adaptors to fit most rotary tools. 3 Sets of ball bearings and special gearing provides long lasting and smooth operation. Coupling system allows you to rotate and position the attachment on your tool. Quick connect system attaches to your rotary tool without tools. Compact design fits almost anywhere. Includes collet nut and square drive not, but does not include any collets. Uses standard Dremel sized collets. Rotary tool not included. For use with most Corded Dremel, Black and Decker RTX, Co/Tech, King Craft, Budget, Maxicraft, Einhell, Wetekom, and Skil Small Rotary tools.

Buy Now

Click here for more information about Milescraft 1008 Roto 90 Right Angle Attachment

Read More...

Milescraft 10010003 Rotary Tool Angle Plunge Attachment Review

Milescraft 10010003 Rotary Tool Angle Plunge Attachment
Average Reviews:

(More customer reviews)
I purchased this based on the picture, which I thought matched the description. However, the Milescraft 1001 tool isn't remotely the same as what you see in the pictures. It is NOT a corner tool, like what is shown in the pictures. It is, in fact, a plunge drill guide for rotary tools, which is intended for use on flat surfaces, not corners. The Milescraft tool for working in corners is actually the 1002 model. DON'T BUY THIS IF YOU WANT A CORNER TOOL - do a search for Milescraft 1002, instead.

Click Here to see more reviews about: Milescraft 10010003 Rotary Tool Angle Plunge Attachment

MilesCraft 1001 AnglePlunge. Adjustable plunge depth up to 1 inch. Accurate depth setting and positive depth stop for maximum control plunge. Easily converts for grout removal without tools. Adjusts through a full 105 degree arc (60 to 45). Drill holes at an angle with a rotary tool. Guides rotary tool bits at precise angles. Use for cutting drywall, plywood or for grout removal. Unique plunging action allows for clean material entry. Rotary tool not included. For use with most Corded Dremel, Black and Decker RTX, Co/Tech, King Craft, Budget, Maxicraft, Einhell, Wetekom, and Skil Small Rotary tools.

Buy Now

Click here for more information about Milescraft 10010003 Rotary Tool Angle Plunge Attachment

Read More...

Hitachi DB3DL 3.6-Volt Lithium-Ion Cordless Screwdriver Review

Hitachi DB3DL 3.6-Volt Lithium-Ion Cordless Screwdriver
Average Reviews:

(More customer reviews)
I wanted a smaller power driver than my 7.2 volt Dewalt, which is too heavy and bulky to just stash in a tool belt. My choice was between the Hitachi DB3DL and the Bosch PS20-2 Litheon 10.8 Volt Lithium Ion Pocket Driver With 2 Batteries. Both are excellent, so which should you choose? Ideally, you should handle both.
Weight: The Bosch is about twice as heavy. I hardly notice the Hitachi in a pocket or tool belt.
Power: The Hitachi is a light-mid duty tool. It's surprisingly powerful, but the extra voltage in the Bosch enables it to rival larger drill-drivers in all but the most demanding situations.
Versatility: I like the hinged configuration of the Hitachi, enabling you to use it in a straight or pistol-grip configuration. The Bosch is pistol-grip only.
Convenience: The Bosch has a separate reversing switch like the ones found on nearly all power drills. (I frequently curse these switches since I frequently press them by accident and forget to press them when I should.) I prefer the rocker switch on the Hitachi, which is very intuitive and lets me reverse in a single operation. When doing electrical work, it's nice to be able to reverse simply by moving my finger on the trigger.
The Bosch will likely appeal to you if you're looking for something like a conventional drill-driver in a smaller, lighter package without sacrificing too much power. I own 3 Bosch routers and 2 sanders, so I can honestly say that I love Bosch tools. The quality is great. So why didn't I buy the Bosch PS20-2?
I chose the Hitachi because of it's very light weight, comfort, and convenience. Since my purchase, I've picked up the Bosch a few times to see if I made the right choice. Every time, my answer is "Yes." Unless you really need the 10.8 volt torque, you'll should be very happy with the Hitachi.
The only improvement I'd like is a clip for a bit or two, but that would probabably make the tool fatter. In this case, slim is better.

Click Here to see more reviews about: Hitachi DB3DL 3.6-Volt Lithium-Ion Cordless Screwdriver

With a compact design and superior power-to-weight ratio, the Hitachi DB3DL 3.6-volt lithium-ion screwdriver is ideal for electricians, installers, and woodworkers. Perfect for a variety of fastening applications, this screwdriver converts easily from straight grip to pistol grip, making it great for tough-to-reach places. This screwdriver is backed by a lifetime warranty and features lithium-ion batteries that boast three times the runtime of traditional batteries, yet weigh 50 percent less.
Superior Power-to-Weight RatioOffering 44 inch/pounds of torque in a body that weighs less than one pound, the DB3DL has a better power-to-weight ratio than the competition. And with a two-speed transmission that offers maximum no-load speeds of either 200 or 600 RPM, this screwdriver fastens and pre-drills wood, mild steel, aluminum, and more.

Additionally, the DB3DL's 21-stage clutch provides both high torque and precision driving. A reversing trigger switch lets you quickly choose from 0-600 RPM for the job at hand.

Chock-Full of User-Friendly FeaturesIn addition to its powerful motor, the DB3DL has a host of features that help you get the job done with comfort and convenience. To start, this screwdriver features a non-slip elastomer-grip handle that makes long jobs more comfortable. The handle is adjustable to two positions, allowing for a choice of straight-grip or pistol-grip operation.

For added convenience, the DB3DL includes a 1/4-inch quick-change hex chuck with bit lock for fast and easy bit changes. An added bonus, an integrated LED work light helps illuminate dark work areas.

Designed to reach places that other cordless screwdrivers just can't, the Hitachi DB3DL is compact and lightweight, measuring 9.75 inches and weighing just 0.9 pounds.

HXP Lithium-Ion Batteries Last 3X Longer and Weigh 50% LessThe DB3DL owes its light weight to two HXP lithium-ion batteries. These 1.5 Ah batteries weigh half of what traditional NiCd or NiMH batteries weigh--in fact, tools featuring HXP batteries are on average one pound lighter than tools using traditional batteries.

Additionally, HXP batteries last three times longer than their competition--these batteries will last approximately 500 charges before needing to be replaced. Overall, less frequent battery charges and longer battery life mean reduced operation costs for you.

The DB3DL's charger will power the tool's batteries in just 30 minutes and features a built-in Cool Air Flow system to maintain optimal charging temperature.

Every Hitachi cordless power tool is designed to the highest standards and rigorously tested for both performance and durability. Like all HXP lithium-ion cordless tools, the DB3DL comes with a lifetime lithium-ion tool warranty, which protects against possible defects in materials and workmanship. Also, the tool's batteries come with a two-year warranty and the charger comes with a one-year warranty.

What's in the BoxDB3DL cordless driver drill, 2 3.6-volt HXP 1.5 Ah lithium-ion batteries (326263), charger (UC3SFL), and case (326346).




Buy NowGet 47% OFF

Click here for more information about Hitachi DB3DL 3.6-Volt Lithium-Ion Cordless Screwdriver

Read More...

10pc Mini Needle DIAMOND FILE Set = ceramics + tile + glass Review

10pc Mini Needle DIAMOND FILE Set = ceramics + tile + glass
Average Reviews:

(More customer reviews)
These are the perfect files for metal clay to reach small, tight spaces. I love them! The assortment of shapes is a plus and the price was great.

Click Here to see more reviews about: 10pc Mini Needle DIAMOND FILE Set = ceramics + tile + glass

Here's a set of (10) tiny embedded-diamond files with round dipped handles, just in case you have some tiny embedded diamonds that need filing. The file portions are 1 mm to 2 mm wide, with assorted pointed-round, pointed-flat, and blunt-flat tips.

Buy Now

Click here for more information about 10pc Mini Needle DIAMOND FILE Set = ceramics + tile + glass

Read More...

SE Flexible Shaft Grinder + Chuck + Pedal + Switch Review

SE Flexible Shaft Grinder + Chuck + Pedal + Switch
Average Reviews:

(More customer reviews)
I work in a mold shop and I have tryed out many flexible shaft grinders over the years. This one is the best I have used so far. I have payed a lot more for a tool like this and none work as well as this one does. Most of the other flexible shaft grinders will over heat the cable and lock up over time. This one is still going after 3 months of hard use. If you buy this you will not be unsatisfied with how it preforms.

Click Here to see more reviews about: SE Flexible Shaft Grinder + Chuck + Pedal + Switch

New - 500-22,000 rpm Variable Speed smooth running Flex Shaft Grinding Tool. Shaft is 43" Long. Comes with Variable Speed Foot Control. Accepts bits from 1/32" to 5/32". This includes all dremel type bits. Comes with an assortment of accessories for grinding, sanding, polishing, for start up. All needed tools and instructions are included. This is a very good unit for hanging over your workbench. Has good torque for harder grinding jobs. Good for wood carving, hobby and jewelry work and more.

Buy NowGet 52% OFF

Click here for more information about SE Flexible Shaft Grinder + Chuck + Pedal + Switch

Read More...

Ek Success Inscriblio Engraving Tool Review

Ek Success Inscriblio Engraving Tool
Average Reviews:

(More customer reviews)
I was exposed to the Inscriblio while working at a craft store. I used it to etch names onto glass. It was easy to learn how to use and I love the versatility. You can etch into glass, rock, metal, wood and more. You do need to practice a bit to get a feel for it since it moves smoother in certain directions. Keep in mind that it is a tool and as with any new tool you will have to learn how to use it, learn the precautions to take(eye protection for example) and learn what its limits are. I have used it to inscribe into glass, rock and metal. Each of those materials are a bit different so again I would suggest you practice first. Take your time when using the tool; you'll find the proper speed necessary to etch the surface you're working with.
Although I have emphasized practice I still would recommend this tool for pretty much anyone. It is easy to use and you should be quick to learn it. Depending on how precise you want to be will determine how much you should practice.
A tip for when working with a flat surface like glass: print out the text you want to inscribe and keep in mind that thin lettering will be harder to work with. Tape the paper onto the surface and then slowly go over the paper and then into the glass.

Click Here to see more reviews about: Ek Success Inscriblio Engraving Tool

Now this is going to leave a mark. Use the Inscriblio Engraving Tool to inscribe glass metal wood stone ceramic leather plastic acrylic and more. Perfect for decorating and personalizing scrapbook pages albums tools general crafts picture frames and most other items. Features a unique stay-on button for easy use and includes one versatile diamond tip which is best when used to engrave plastic metal wood and leather. Cordless engraving tool operates with 4AAA batteries: not included. Tip diameter: 1-1/2-mm. Tip length: 45mm. Material: ABS fireproof. Keep out of reach of children. Protective eyewear is recommended for safety.

Buy NowGet 64% OFF

Click here for more information about Ek Success Inscriblio Engraving Tool

Read More...

Disc/mandrel/guard Review

Disc/mandrel/guard
Average Reviews:

(More customer reviews)
Great idea, but both GyrosGuard shields can't thread onto the Dremel 935 model.
Otherwise the guard would have been perfect.

Click Here to see more reviews about: Disc/mandrel/guard

* Made of clear, shatter-resistant lexan * Spring-loaded and self closing * Fits Dremel, Craftsman, and Black and Decker * Up to 2-1/2" diameter capacity * Free 2" fiber disk and mandrel *

Buy NowGet 40% OFF

Click here for more information about Disc/mandrel/guard

Read More...