Chicago Power Tools 63558 220-Piece Rotary Tool Set Review

Average Reviews:

(More customer reviews)This is about the same as all the other off brand rotary tools but with a few more attachments, a variable speed control (works VERY well), and a kinda funky/quasi-useful case.
If you're looking for a big set of very cheap, acceptable quality attachments this is great and to tool itself works fine. No weird smells when run for too long or under too much strain (my previous tool would smell up the room if used that way). I'm very happy for the price!
Only down side is that the case for it is, well, not very good (some pieces fall out of their places) and can be hard to get the main tool itself out (I solved this by removing 2 of the 4 clips holding it down .. works great now). Also the case is kinda large and can be hard to store.

Click Here to see more reviews about: Chicago Power Tools 63558 220-Piece Rotary Tool Set

Chicago Power Tools 220 Piece Rotary Tool Workshop

Get 17% OFF

Click here for more information about Chicago Power Tools 63558 220-Piece Rotary Tool Set

Read More...

Milescraft 1098 Rotary Tool Work Center Router Table Review

Average Reviews:

(More customer reviews)It's one of those tool add-on's that you wish you had, if you run into a project that requires what this little item will do. While true that it's uses are limited, it will be a big help - when you need it. Great precision? No. You'll have to spend a good bit of time with setup and adjusting it just right for what you need. Once you set it right, it will pay off big in quality results.
I have a lot of Dremel experience, and it's the exact same item, regardless of the brand sticker... I recommend it if you need a device of this type. Just think of it as a micro-router table, and basically all plastic instead of metal. It's plenty enough for those micro projects. You won't be running 2x4's through this!
Always wear your safety glasses when using any high-speed tool!

Click Here to see more reviews about: Milescraft 1098 Rotary Tool Work Center Router Table

Milescraft 1098 Rotary Tool WorkCenter. Shape. Sand. Trim. Edge. Convert your Dremel into a Router Table. Use your rotary tool like a router, shaper, planer, or sanding disc. Features an adjustable fence, and a large 8 inch by 6 inch work table. The clear safety shield with built-in vacuum tube provides protection from debris while keeping your work area clean. Rotary tool not included. For use with most Corded Dremel, Black and Decker RTX, Co/Tech, King Craft, Budget, Maxicraft, Einhell, Wetekom, and Skil Small Rotary tools.

Click here for more information about Milescraft 1098 Rotary Tool Work Center Router Table

Read More...

Dremel 8030 Saw Blade Review

Average Reviews:

(More customer reviews)I thought, for several years, that I would have to buy a new saw when my last blade broke but now the blades are available again. I guess the saws lasted better than expected as my Dremel saw belonged to my father and was given to me in his will. The saw is working fine and my father had many extra blades that were slowly breaking and the replacement blades were not available for years. Imagine my surprise just as I was down to two fragile blades I found them again on Amazon! Yea!!!

Click Here to see more reviews about: Dremel 8030 Saw Blade

3" long. Package of 5. For use with Moto Shop scroll saw model No. 571, 572, and 1571. No. 8029: Fine tooth No. 8030: Coarse tooth

Click here for more information about Dremel 8030 Saw Blade

Read More...

Dremel PL400 XPR Planer Attachment Review

Average Reviews:

(More customer reviews)Makes reasonably quick work of trimming a door edge that rubs, but doing a neat job takes some practice. Heavy touch up sanding will be required.
This Dremel attachment is like every other Dremel attachment I have been suckered into buying, it is clearly designed by bean counters. It works just good enough that I would feel bad about throwing it out. For $20, it is a nice tool to have, but I would gladly pay more for one that had a better guide and did a neater job.
A couple specific gripes:
1. The 1/64th depth isn't off by a bit, it is off by a factor of 4. It planes nearly a 1/16th off per pass. I'm still trying to figure out how they came up with the 1/64th number.
2. The guide is useless, it is up to the user to attempt to keep the tool flat on the surface. This takes some practice and will result in some gouges and uneven planed surfaces that need to be smoothed off with sanding.


Click Here to see more reviews about: Dremel PL400 XPR Planer Attachment

The new Dremel XPR planer attachment shaves approximately 1/64 inch at a time so you can control the amount of material being removed. The 2 1/4-inch cutting surface is ideal for woodworking projects, and the hardened high-speed cutter has been tested to over 500 linear feet. This great tool is designed to perform planing tasks on sticking doors, picture frames, woodworking projects, hardwood flooring, laminate countertops and much more. The long-lasting, precision-ground blade slices at speeds up to 35,000 rpm to produce a smooth surface that's free of milling marks.

Get 37% OFF

Click here for more information about Dremel PL400 XPR Planer Attachment

Read More...

Dremel 2500-01 Rotary Tool Multi-Vise Review

Average Reviews:

(More customer reviews)I wasn't expecting too much from the reviews and knowing this is all plastic. For light work its great and very easy to work with during projects. You can put the vise in differently than the photo shows allowing your to quickly remove it from the bench or desk and take it to the drill press or wherever. As discussed its not for super heavy duty work where you need a metal vise.

Click Here to see more reviews about: Dremel 2500-01 Rotary Tool Multi-Vise

The Dremel multi-vise helps you secure your project or free up a hand for extra control when using your Dremel rotary tool. The removable cushioned jaws on the 2500-01 help protect delicate workpieces while providing a firm, steady grip, and they clamp to any worksurface up to 2-1/2 inches thick. This holder turns your Dremel rotary tool into a stationary sander, grinder or polisher, and the removable jaws create a stand-alone bar clamp on the Dremel 2500-01.

Get 36% OFF

Click here for more information about Dremel 2500-01 Rotary Tool Multi-Vise

Read More...

Dremel 670 Mini Saw Attachment Review

Average Reviews:

(More customer reviews)Dremel had a saw blade bit an number of years ago but withdrew it, probably because there was no blade guard. Now they have solved the blade guard problem and by angling the tool a bit have made it able to cut in the center of a board. It took a little getting used to before I got comfortable with it because the guard tends to fight you a bit until you develop the technique to open it properly as you start the cut. It is limited to 1/4" depth of cut making it specifically a modelers tool. When used for what it does best, it is great.

Click Here to see more reviews about: Dremel 670 Mini Saw Attachment

Mini Saw attachment for the Dremel MultiPro rotary tool. This unique attachment allows cuts through wood like never before. It attaches in seconds and makes clean, straight, perpendicular cuts up to 1/4 inch thick. Use for DIY, hobbies, crafts and modeling. Also cuts through paneling.

Get 36% OFF

Click here for more information about Dremel 670 Mini Saw Attachment

Read More...

Dremel MS400 MultiSaw Attachment Review

Average Reviews:

(More customer reviews)This attachment came with my 400 XPR. My first impression, when I saw it and put it on the XPR, was that this thing is going to be a pain to control.
But one incident completely changed my mind.
I have a house that was built in the 50's and the doors and the door knobs are all from the time that the house was built.
A few of the inside door knobs quit working properly so I went and got some new knobs.
The standard door knobs now have different depths and diameters than the originals on my doors.
I had my choice; buy all new doors and knobs or break out this Dremel MultiSaw attachment and go crazy.
Man does this thing work great!!!
It got around in those doors like a hot knife through melted butter.
It uses blades for most standard jigsaws, so I had other blades around.
This thing saved me the cost of buying all new doors for my house. I recut three dorr knob holes and the latch holes in a matter of 20 minutes and installed the new knobs in 10 more.
If you don't have this for your XPR, get it!!

Click Here to see more reviews about: Dremel MS400 MultiSaw Attachment

Ideal for cutting in tight spaces where other saws can't reach, the XPR MultiSaw makes cutting scroll and straight-line patterns a cinch. The attachment features a universal blade holder that accepts both -InchU-Inch and -InchT-Inch shank blades for maximum versatility. Your purchase is covered by a 5-year warranty.

Get 39% OFF

Click here for more information about Dremel MS400 MultiSaw Attachment

Read More...