Versa-Tool MB3L Triangular Flush Cut Universal Oscillating Carbide Rasp, 3 Pack Review

Average Reviews:

(More customer reviews)The 3-pack of carbide rasp attachments were purchased for a Craftsman brand multi-tool. They were tested to ensure they fit, but have not yet been used. They appear to be OK. The shipping was timely from this seller.

Click Here to see more reviews about: Versa-Tool MB3L Triangular Flush Cut Universal Oscillating Carbide Rasp, 3 Pack

Made with brazed shards of abrasive carbide material, this triangular rasp will effectively remove and grind the toughest materials. The MB3L's triangular design allows this tool to work in corners and the carbide design allows this products to grind materials such as concrete and brick. Great for removing thin-set and mortar material during tile repair projects. Flush cut arbor design for ease of use in demanding situations. The Versa-Tool universal arbor system is compatible with the following brands. Fein Multimaster (All models including FMM250Q, 250, MSx 315 and all models featuring 3/8 inch round arbors), Bosch corded and cordless multi - x, CRAFTSMAN, Chicago Electric, Tool Mate, Power Craft, SECCO, HTC-87, EINHELL, Top Craft, Artwork, MEEC Tools, Man Power, Millarco prof, Westfalia, Falke, Ferm Zwolle Holland, Cougar, Rock Worth, B&Q, Counstructor, Duro, Work Best, Matrix, Pro-Line, Ideenshop, Driving Force, LongActive, VOSS. The Versa-Tool universal arbor system is not compatible with the Fein Supercut, DREMEL or Sonicrafter. Fein, Multimaster, Supercut, Dremel, Sonicrafter, BOSCH, SECCO, Chicago are trademarks of there respective owners.

Click here for more information about Versa-Tool MB3L Triangular Flush Cut Universal Oscillating Carbide Rasp, 3 Pack

Read More...

Versa-Tool Flush Cut Universal Oscillating Knife Edge Scraping Spatula Review

Average Reviews:

(More customer reviews)I have the Fein multimaster and the Fein blades are so expensive and these blades fit and work great. Also use them on the Rockwell soni crafter. They hold up great.

Click Here to see more reviews about: Versa-Tool Flush Cut Universal Oscillating Knife Edge Scraping Spatula

Made from high speed steel, this flush cut scraper is ideal for removing paint, glue, tar, old varnish, floor coatings and countless other material from flat, delicate surfaces. Ideal attachment to effectively remove material from glass, wood, plastic and metals without damage. Use this sharp tool to effectively cut materials including carpet, vinyl, fabric, fiberglass mesh and leather. Curved blade design allows for flush cutting and scraping applications. This package includes 3 blades. The Versa-Tool universal arbor system is compatible with the following brands. Fein Multimaster (All models including FMM250Q, 250, MSx 315 and all models featuring 3/8 inch round arbors), Bosch corded and cordless multi - x, CRAFTSMAN, Chicago Electric, Tool Mate, Power Craft, SECCO, HTC-87, EINHELL, Top Craft, Artwork, MEEC Tools, Man Power, Millarco prof, Westfalia, Falke, Ferm Zwolle Holland, Cougar, Rock Worth, B&Q, Counstructor, Duro, Work Best, Matrix, Pro-Line, Ideenshop, Driving Force, LongActive, VOSS. The Versa-Tool universal arbor system is not compatible with the Fein Supercut, DREMEL or Sonicrafter. Fein, Multimaster, Supercut, Dremel, Sonicrafter, BOSCH, SECCO, Chicago are trademarks of there respective owners.

Click here for more information about Versa-Tool Flush Cut Universal Oscillating Knife Edge Scraping Spatula

Read More...

Variable Speed Oscillating Multifunction Power Tool Review

Average Reviews:

(More customer reviews)When I first bought a multifunction tool, the Rockwell was the only real alternative to the Fein. I had good experience with other Rockwell products, but there was damage to the accessory case, so I didn't get to try it before sending it back. I found the original Chicago Electric single speed tool (no longer made) for such a low price that I figured if it lasted through the job I bought it for, it would have been worth it. Plus it would give me a good idea whether to replace it with a "real" tool such as the Rockwell.
That summer, I redid my windows and door frames on a good sized two story house. I used it from morning until it got dark for about two months straight. I could not think of a power tool I had gotten in a long time that came close to the versatility and sheer usefulness of that tool.
The only problems with my first one were that it was a single speed (11,000 RPM; Chicago now makes a faster single speed one) and the part where the accessories attach did not have the raised parts that went into the small holes on the blades near the center. That meant that it occasionally slipped unless I tightened the bolt with an Allen wrench so tight it was scary, but it did not come close to stripping.
It may seem unusual that I am reviewing the wrong tool, but I was so impressed with it that I went out and bought this multi speed model. It does everything the first one does and more. It is larger and more powerful, but not unwieldy. Blade attachment is easier and they remain in place among a good choice of positions. It comes with a nice case, but it could have been designed better for storing the power chord.
Since I bought mine, I've tried a variety of attachments, and have a few that I'm sure I will need but have not used yet. Nevertheless, it's not a tool that just sits on a shelf. I probably use at as often as an electric drill, which is saying a lot in the power tool world.
The advantage of a multi speed model is that it works well for sanding at lower speeds when appropriate and at higher cutting speeds when needed. It has a similar speed range to the best on the market.
Usually when I see a tool that claims to do everything, it's a gimmick and either I would never come close to using all the attachments or the tool doesn't measure up to what I saw on TV. This one was different. It exceeded my expectations in every way.
One attachment worked well to dig out silicone caulking from around doors and windows so they could be redone properly. It also served to scrape off flaking paint easily and thoroughly. There is some risk of gouging, but I haven't found anything better for that application.
Where it really saved more than its price in a single use was for plunge cutting. If you need to cut off a section of wood that needs to be left in place, it can't be done with a circular saw or jigsaw and even hand tools can't help with what I needed. Being able to easily replace a section of rotting wood on something like a garage door or door frame can pay for the tool alone compared to replacing the entire section of wood.
I was even able to cut down the inside of a door frame from top to bottom along the edge of the molding that the door closes against. Any carpenter would have told me that I would have needed to redo the entire frame for my French doors, and replacing the doors themselves would have been more practical given the same labor. But I was able to fabricate a replacement section using this tool, a router and a table saw.
It really does allow you to cut straight lines in wood freehand. A rotary "zip" style tool is an example of something that looked great on TV but had limited real life use. If you want to cut out sections of drywall to put in switches, outlets or medicine cabinets, this is the tool to use instead. And you will have no problems doing it freehand. You also have the option of nailing a board in place temporarily and using it as a guide, since you can literally plunge cut along the edge of it. But you may find that drawing a pencil line works just as well.
I've had a finishing sander for years, and it's handy for tight corners and special needs where no other sander will work. I didn't use it much and didn't think I'd gain much by having yet another tool to do the same thing. But the multifunction tool worked better than the original, and I'd recommend the finger sander as an add on. Having the tool literally already in hand when I needed to sand made me realize how flexible a finishing sander can be and I now use it a lot for that. All it needed was a quick change of attachments.
The stock attachments really do work well for jobs such as stripping linoleum and removing glued down carpet. The only job I found where it did not fully meet expectations was slicing through copper tubing. If you get up above 3/4 inch it will be slow going, and there are better tools for the job unless you need a flush cut and can keep the pipe rigid enough that it won't vibrate independently.
I've even used it to cut slots in screw heads for screwdriver use. Although a Dremel works better for that if you have one already, it's still a good tool for use in a pinch.
The biggest difference between this and other power tools is that there are so many jobs that it not only does well, I can literally think of no alternative short of demolition and replacement. I thought it would be a specialty tool for those rare tasks when nothing else works. But it's so much more, and one of the few power tools I'd hate to be without.


Click Here to see more reviews about: Variable Speed Oscillating Multifunction Power Tool

There's no need to buy several power tools when this one tackles all sorts of cutting, scraping and sanding tasks by itself. Our easily affordable, variable-speed multi-function tool from Chicago Electric Power Tools works at 10,000 to 20,000 oscillations per minute to give you control and power over every job, and it's easy to switch attachments depending on the task. Multi-tool cuts through cable, downspouts, air ducts, plasterboard and pipes, sands down cement, concrete, plaster, stone, tile adhesive, paint and wood...even saws through wood up to 2-1/4" thick.* Includes 3" triangular sanding pad (with 2 sanding sheets), half-moon cutting blade, angle scraper blade and angle cutter blade* Variable speed: oscillates at 10,000 to 20,000 strokes/minute* Compare to MultiMaster that costs several times as much* Die cast aluminum gear housing* Sealed bearings for durability120 volts, 60 Hz, 2 amps, 1/4 HP6-ft. power cordOverall dimensions: 11" L x 2-7/16" W x 3-1/2" H

Click here for more information about Variable Speed Oscillating Multifunction Power Tool

Read More...

Versa-Tool MB10B 1-3/8-Inch Bi-Metal Universal Oscillating Saw Blade, 10 Pack Review

Average Reviews:

(More customer reviews)These blades offer a reasonably priced alternative to the Fein blades which are exhorbitantly priced. I'd like to see a wider range of these alternative blades available for other tasks such as grout removal and scraping.

Click Here to see more reviews about: Versa-Tool MB10B 1-3/8-Inch Bi-Metal Universal Oscillating Saw Blade, 10 Pack

Ideal for demolition, plumbing, remodeling and general wood and metal cutting the Versa-Tool Bi-Metal oscillating saw blade cuts nail embedded wood, fiberglass, tubing, PVC, copper Pipe, metal mesh, sheet metal and other metallic and non-metallic materials. Versa-Tool Bi-Metal Blades are great for Flush and Plunge cuts and are designed with laser welded high speed steel cutting edge and flexible alloy steel back to resist breaking, further extending blade life. The Versa-Tool universal arbor system is compatible with the following brands. Fein Multimaster (All models including FMM250Q, 250, MSx 315 and all models featuring 3/8 inch round arbors), Bosch corded and cordless multi - x, CRAFTSMAN, Chicago Electric, Tool Mate, Power Craft, SECCO, HTC-87, EINHELL, Top Craft, Artwork, MEEC Tools, Man Power, Millarco prof, Westfalia, Falke, Ferm Zwolle Holland, Cougar, Rock Worth, B&Q, Counstructor, Duro, Work Best, Matrix, Pro-Line, Ideenshop, Driving Force, LongActive, VOSS. The Versa-Tool universal arbor system is not compatible with the Fein Supercut, DREMEL or Sonicrafter. Fein, Multimaster, Supercut, Dremel, Sonicrafter, BOSCH, SECCO, Chicago are trademarks of there respective owners.

Click here for more information about Versa-Tool MB10B 1-3/8-Inch Bi-Metal Universal Oscillating Saw Blade, 10 Pack

Read More...

Fein MultiMaster FMM 250Q Top Variable Speed Sanding and Scraping/Cutting Tool with Case Review

Average Reviews:

(More customer reviews)Tool and attachments, 6 Stars.. Case, 2 Stars.. Price, -3 Stars = 5 Stars
This Fein MultiMaster Top kit is one of those tools that cost too much but you can't do the job as fast without it. The last few years, attending woodworking shows, I would watch the demos on the MultiMaster tool. I was ALWAYS impressed as to what the tool was capable of. The price made me walk away. It was not on my list of "GEE, I've got to have that"! However I did see its potential.
Recently, I saw the ad for the new version with the quick blade release and the package supplied attachments, but was still held back by the price. Then it happened. I got a job that required this type of tool.
I had to do a job of installing decorative returns on an old house with period moldings. The old returns had rotted along with some of the crown rake boards. Making the new returns was not a problem; trimming back the 4-inch crown molding was going to be tedious to say the least. I purchased the Fein MultiMaster Top kit and felt the pain all the way back to the job..... Until I opened the box, fitted a (expensive) wood / metal cutting blade and trimmed back old rusty hard to reach nails and 4 inch crown molding to solid wood. The roofs 12/12 pitch made it almost impossible to perform the task at hand with any speed with regular tools. The MultiMaster accomplished the task in minutes. After trimming back 6 returns in under an hour, I was convinced the tool was worth the expense. It was kind of anti climatic however, doing all that work in such short time! $389.00 per hour and done so easily and quickly is what came to mind!
Since the initial purchase, I have found the MultiMaster tool to live up to all I've seen at demo shows. Once you own it, you will find yourself reaching for it more often than you planned. Time verses cost will eventually be offset as this tool pays for itself very quickly.
I find myself treating the attachments as if they were gold, considering their replacement costs. I guess Fein can get away with the high prices because there is no other tool like it that works so well. The blades by the way are very sturdy and long lasting.
Under-cutting doorjambs loaded with trim nails are a breeze. I was able to set tile under 6 doors and the blade teeth still look new. I am looking forward to trying out all the other attachments that came with the "TOP" kit.
The case has some issues. It is nice and square and stores well. It holds all of the supplied accessories and then some. BUT, after seeing the older metal case, the new plastic case is bigger and holds less. The old metal case has foam dividers that make finding each attachment quite easy. Sanding attachments and the paper can be seen on edge. The new case has 2 removable plastic storage cases within the main case. These cases have snap down covers making it difficult to see and grab what you're looking for. Within the small cases, there are no dividers; everything just sits in there bouncing around and store in no particular order. The outside of the main case is consumed by the nice handle, which is recessed in the top of the case when standing on edge, it chews up a lot of storage space that could have been used to have divided storage inside like the old metal case.
I have zero complaints about the quality of the tool and the attachments. They all do what they are supposed to do. My complaints lye with cost of product and attachments, and the poor thoughtfulness of the case storage areas. This tool will not be easy for most people to purchase because of the cash outlay. In my case, it was one of those tools that came to mind while in a predicament. I purchased it, and think of it as a Cool Tool!


Click Here to see more reviews about: Fein MultiMaster FMM 250Q Top Variable Speed Sanding and Scraping/Cutting Tool with Case

Get 40 more power and greater comfort with the "new" MultiMaster. Why scrape paint with a putty knife when you can use a powered scraper blade? Instead of sanding tight spaces with paper wrapped around your finger use one of the MultiMasters profiled sanding pads. With 40 more power and soft grip handle, the new MultiMaster uses a broad assortment of accessory blades to handle hundreds of previously manual tasks. The MultiMaster doesnt rotate or orbit like other power tools. The secret? It oscillates! Oscillation permits you to do extremely fine and delicate work or be more aggressive, depending on the accessory and material. Its a multipurpose tool that performs each of its tasks as if it were dedicated to that function alone. Variable speed (11,000-20,000 oscillations per minute) 250 watt. It provides great results with a starter kit for your basic renovation needs. Complete with the soft grip, star arbor that locks accessories in place and 40 more power! The Fein MultiMaster Top includes: 1 FEIN MultiMaster FMM 250 Q, 1 sanding pad, 5 of each type of sanding sheet 80, 120 and 180, 1 universal E-CUT saw blade (44mm), 1 HSS segment saw blade, 1 Carbide-tipped segment saw blade, 1 rigid stopping knife, 1 Profile sanding set, 1 dust extraction device, 1 sanding pad, perforated, 5 of each type of sanding sheet, grain 80, 120 and 180, perforated, 1 carbide rasp (triangular, perforated), 1 plastic carrying case.

Get 45% OFF

Click here for more information about Fein MultiMaster FMM 250Q Top Variable Speed Sanding and Scraping/Cutting Tool with Case

Read More...

Fein FMM 250Q Top Plus MultiMaster Oscillating Detail Sander Tool Kit Review

Average Reviews:

(More customer reviews)I bought this tool with a specific job in mind - removing the vinyl floor in my kitchen. My installer said we'd need to go over the old floor with new underlayment, since the old floor would just be too hard to remove, and we'd probably damage the plywood underneath. But I recalled seeing this tool in action, and placed my order, hoping I hadn't just made a $399 mistake.
I opened the case, installed the power scraping blade, crossed my fingers and turned it on. WOW! It sliced the old vinyl floor away cleanly, adhesive and all, leaving the undamaged plywood behind. I quickly found it was easiest to run a utility knife blade through the flooring in strips just a little wider than the blade, and then the floor started to fly out. To be sure, it's still work, and you're still on your hands and knees - and I wouldn't want to strip an auditorium this way - but for my project, it will save me paying for underlayment (1/2 the price of the tool in one fell swoop!) and, more importantly, keep me from having to build the floor up higher than I'd like relative to the adjacent tile.
I'm sure there's a thousand more things I can do with this tool, and I'm looking forward to exploring it's capabilities. I couldn't be happier with this bad boy!

Click Here to see more reviews about: Fein FMM 250Q Top Plus MultiMaster Oscillating Detail Sander Tool Kit

Designed to help you complete both professional jobs and hobby projects, the Fein MultiMaster FMM 250Q Top Plus is a multi-purpose system for interior fitting and renovation. This all-round package gives you the professional tools and accessories that you need to take on a wide range of hobbies, and interior fittings and renovation projects--from floor and tile work to renovating windows and cabinetry. It includes the MultiMaster FMM 250Q, featuring the tool-free QuickIN rapid clamping system that lets you change out accessories quickly while you're on the job, and a sturdy plastic case.

The FMM 250Q also includes a broad range of accessories for nearly limitless applications, including a universal E-cut blade, rigid scraper blade, carbide-tipped segment saw blade, HSS segment saw blade, carbide rasp, sanding pad, perforated and non-perforated sheets of sandpaper in assorted grains, dust extraction kit and a sanding set.

Whether you are installing new tile in a bathroom, trimming new windows and doors for your addition, or finishing up your child's school woodworking project, the Fein MultiMaster FMM 250Q Top Plus offers the performance and accessories you'll need to get the job done quickly and professionally.

Versatile, High-Precision Specialist ToolThis system features the FMM 250Q, a versatile, high-precision specialist tool that's perfect for professional outfitting, renovation, and repair work. Its lightweight, ergonomic design, and powerful 250-watt motor with electronic speed control, makes the FMM 250Q ideal for sanding in tight corners.

This versatile and powerful tool features the tool-free QuickIN rapid clamping system, which means that you can change out your accessories quickly and easily without having to slow down your progress by fumbling for tools. Developed as a result of Fein's 40-year experience with oscillation technology, the FMM 250Q boasts 12,000 to 21,000 oscillations per minute and includes a 16.4-foot cord.

Universal E-Cut Blade For Base and Flooring WorkThe FMM 250Q comes with several high-quality accessories, including one Fein 63502152010 Universal E-Cut Blade and Fein 63502134015 Standard E-Cut Blade that are great for doorjambs, baseboards, baseboards, toe kicks, and flooring work. It's also perfect for wood, plaster, drywall, and synthetic and plastic materials. This blade features a finer tooth pattern for more control and longer blade life, and a flush cut design that allows for completely perpendicular cuts to flooring tight areas.

Rigid Scraper and Segmented Blades For Tough JobsFor tough jobs like lifting linoleum, carpet, adhesive residue, scale, paint, and tape, choose the Fein 63903178017 Rigid Scraper Blade, which can be re-sharpened for longer blade life. This system also includes the efficient Fein 63502106015 HSS Segmented Blade for fiberglass, carbon fiber, 20 gauge sheet metal, and harder woods. Segmented to cut right angles without over cutting, this flat, high-speed steel blade performs straight cutting in harder material, and can cut into corners with right angles.

The system also includes one Fein 63502118016 Carbide-Tip Blade for cutting out damaged tile joints and for carving out grooves in plaster, porous concrete and similar construction materials. A Fein 63731001014 Carbide Rasp allows for rough grinding of filler, tile adhesives, concrete, stone, and wood, and may be used with or without the included Fein 92602081010 Dust Extraction Kit.

Finally, to make sure final results are smooth, the FMM 250Q Top Plus includes several sheets of sandpaper in different grains, as well as a Fein 63806183029 Profile Sanding Pad.

The FMM 250Q Top Plus is backed by a one-year warranty. Two additional years are included with product registration.

ENDPRODUCT NAME: Fein FMM 250Q MultiMaster Select Plus

Get 20% OFF

Click here for more information about Fein FMM 250Q Top Plus MultiMaster Oscillating Detail Sander Tool Kit

Read More...

Rockwell RK5108K SoniCrafter 100-Piece Super Professional Kit Review

Average Reviews:

(More customer reviews)I have been looking at these for a couple of years and could not decide between the Rockwell and Fein units. When Rockwell came out with the RK5108K kit, I jumped on it. And it is an awesome tool for plunge cutting wood, plastic, or sheet rock.
I had a door frame that did not quite align with the door, preventing the door from staying closed. I was able to cut the frame loose and re-align it in just a few minutes. I should have bought a tool like this years ago!!

Click Here to see more reviews about: Rockwell RK5108K SoniCrafter 100-Piece Super Professional Kit

Giving you the ability to sand, polish, scrape, and cut a wide variety of materials, the Rockwell RK5108K SoniCrafter 100-piece super professional kit is your all-in-one tool kit for carpentry work. Enhanced by 99 accessories, the variable-speed tool operates with microsonic high-frequency oscillation to produce smooth, safe movements without kickback. Ideal on the job site or around the house, this efficient tool boasts a slim body that makes it ideal for working in confined spaces.
A Complete Workshop in One Versatile ToolWhether you're a professional woodworker or an avid do-it-yourselfer, the RK5108K is an effective way to streamline your work. Easily carried in its compact, lightweight case, the kit can be kept at your fingertips for all your remodeling, installation, and repair projects.

Starting with the basics, the 100-piece professional kit comes with a variable-speed tool and includes seven cutting blades, a carbide grit blade, a finger-sanding pad, 40 finger sanding sheets, a triangular sanding pad, 40 triangular sanding sheets, and two polishing pads that help you cut, remove grout, and sand, with professional-grade results. It also includes two tough, broad-spectrum scrapers, two carbide grit rasps, a universal adapter, a vacuum adapter, and a hex key.

Sprucing up the garage? Utilize the scraper attachment to remove paint, old caulking, and rust. Remodeling the bathroom? Remove grout with the kit's carbide grit blade and score ceramic tiling for shaping with the optional diamond-grit blade. Exposing hardwood? Remove carpeting using the broad spectrum scraping blade then let the sanding system take over to polish those hard-to-reach spaces.

High-Frequency Oscillation for Smooth, Safe PrecisionFor the safest and most accurate work, the RK5108K features super high-frequency oscillation technology. This means that instead of rotating, it makes up to 20,000 back-and-forth oscillations per minute for ultra smooth, efficient results. Because there are no fast-spinning parts or alternating blades, there are no threats of kickback.

Thanks to its advanced design, the RK5108K cuts only hard materials when fitted with a blade attachment. This way, the tool easily cuts heavy-duty materials, while keeping the user's hands and fingers safe.

The RK5108K can cut wood, thin metals, fiberglass, masonry, plastic, carpet and flooring, cement board, and even vinyl siding.

High Sanding Capacity with Low Dust LevelsFor sanding jobs, this tool requires very little downward pressure and delivers great accuracy. And its slim body enhances your sanding capabilities, allowing you to work on edging and corners that are often not possible to reach with other tools. Plus, it affords you quick and easy clean-up, throwing a very low level of dust whether you're sanding, cutting, or scraping.

Easy Handling with Lightweight Frame and Soft GripThe RK5108K has magnesium alloy gear housing, making it lightweight enough for extended use and rugged enough for long-term durability. The soft, ergonomic grip offers you optimum comfort and control while you tackle the job at hand.

What's in the BoxRockwell RK5108K variable speed SoniCrafter tool, 7 cutting blades (4 universal end-cut blades 2 circular-saw blades, and 1 HSS semicircle saw blade), 1 carbide grit blade, 1 broad-spectrum scraping blade, 1 flexible scraping blade, 1 triangular carbide rasp, 1 finger-shaped rasp, 2 polishing pads, 1 finger sanding pad, 40 finger sanding sheets, 1 triangular sanding pad, 40 triangular sanding sheets, 1 hex key, 1 universal adapter, 1 dust extraction adapter, and a convenient carry case.

Get 38% OFF

Click here for more information about Rockwell RK5108K SoniCrafter 100-Piece Super Professional Kit

Read More...

Craftsman 12 Volt NEXTEC Multi-Tool Review

Average Reviews:

(More customer reviews)I really like this tool!
Pros:
- cheaper than the others
- cordless and really easy to handle
- easy to learn and use
Cons:
- battery life is about 10 mins with good use
- it does get a bit hot after 5 mins of continual use - enough to warrant gloves
- not nearly as powerful as what I've seen Fein do.
Now, comparing to the reviews I've read or the commercials I've seen for the Fein MultiMaster, it doesn't even come close. If you're anything more than a weekend do-it-yourself-er, this may not be for you. But if you're like me, this tool is sufficient and for the price, not bad at all (I actually picked this up for around $60, refurbished, from a common store's liquidation site).
What I used it for that worked out really well:
- cutting out the square electrical outlet holes in our kitchen cabinets
- dry wall cut-outs
- precise cuts for molding, baseboards, special projects
- small cuts (< 6 inches) on plywood
- precise cuts on medium quality bamboo floors (like around door moldings, corners, etc.)
- sanding an old teak chair I was restoring, getting into those small crevices, in between the slats.
What I used it for that didn't work out:
- Cutting notches in 2x4's - not enough power
- Precise cuts on dense teak floors - not enough power
- medium or longer cuts (> 6 inches) on plywood - not enough power; takes too long
- metal gutters - it did the job eventually, but it took a while. Again, not enough power.
People also recommend another battery, which I kind of agree with - however I have not yet, as I've managed to charge in between uses to keep the battery charged all day. I've also placed the whole tool + battery in the refrig to cool it down while not used it (just for 15 mins or so). It does get hot and once it did not charge because the unit was too hot.
Overall, I really like the tool and it's one of my favorites - but you really do need to adjust your expectations. If you're a contractor or a person who will use this every day - this won't do.

Click Here to see more reviews about: Craftsman 12 Volt NEXTEC Multi-Tool

The compact 12 Volt battery provides the power of a full-sized battery in a smaller, lighter weight, longer lasting Lithium-Ion battery. One tool performs multiple tasks by using high-speed oscillations (15000 OPM), a 2.8 oscillation angle and six various attachments. The body of the tool features a soft grip handle, LED work light and an integrated dust bypass for comfort during use and enhanced visibility throughout any application. This versatile tool is ideal for cutting, sanding, scraping, grinding, and removing grout and more. Use on drywall, wood, metal, plastic, tile, masonry, and porous concrete. Its compact, ergonomic design and multiple blade positions allow for use in tight spaces. Perfect for carpentry, electrical, plumbing, flooring, drywall, remodeling, repair and hobbies.

Click here for more information about Craftsman 12 Volt NEXTEC Multi-Tool

Read More...

Imperial 10MM300, Oscillating Blade 10 Pack, for Metal, Drywall, Wood and Plastic - Fits Fein Multimaster, Dremel Multimax Review

Average Reviews:

(More customer reviews)These blades work great in my Fein Multimaster. They are knockofffs, not manufactured by Fein. The price is much better than Fein original equipment, and the blades are long lasting.. they perform great. My only issue with these blades is that the arbor hole is cross-shaped, unlike the authentic Fein blades which have a star-shaped arbor hole. This limits the options in mounting the blade to the tool; it can only be rotated in 45º increments, allowing only 4 different work positions for the blade. The authentic Fein blades with the star-shaped arbor hole can be rotated at 22-1/2º increments -or 8 total work positions for the blade- which allows quite a bit more flexibility in tight or unusual spaces. Hello manufacturer; would it be possible to make these blades with a star-shaped arbor-hole? Other than this one significant drawback, I am very happy with my blade purchase. These blades are workhorses; they stay sharp a long time and have saved me quite a few bucks over the brand-name Fein blades.

Click Here to see more reviews about: Imperial 10MM300, Oscillating Blade 10 Pack, for Metal, Drywall, Wood and Plastic - Fits Fein Multimaster, Dremel Multimax

10mm300

Click here for more information about Imperial 10MM300, Oscillating Blade 10 Pack, for Metal, Drywall, Wood and Plastic - Fits Fein Multimaster, Dremel Multimax

Read More...

Rotary Tool 30 Slot Bit Holder Stand for 1/8" Bits Review

Average Reviews:

(More customer reviews)I bought a couple of these plastic Rotary Tool 30 Slot Bit Holders for 1/8" Bits I purchased cheap off the Amazon store's offers of SE diamond tipped bit sets and they sit well on the top of the bench with the two 30 piece sets perfectly fitted into them.

Click Here to see more reviews about: Rotary Tool 30 Slot Bit Holder Stand for 1/8" Bits

Click here for more information about Rotary Tool 30 Slot Bit Holder Stand for 1/8" Bits

Read More...

Multi-Function Power Tool Review

Average Reviews:

(More customer reviews)I am doing some outside work on my house. I can cut just the bad places on the eaves of the house. I can cut 4x8 sheet of masonite panel to take the panel off the wall that has been affected by termite. Harbor Freight got a very good multi-function power tool. So far the price for this power tool is a very excellent. I have a dremel that does not compare with this power tool.

Click Here to see more reviews about: Multi-Function Power Tool

Multi-Function Power Tool compatible with most 3/8" arbor multi-tool accesories.

Click here for more information about Multi-Function Power Tool

Read More...

Fein MultiMaster 250 Start Power Sanding and Scraping/Cutting Tool Review

Average Reviews:

(More customer reviews)I probably would have given this 4 starts -1 for the ridiculous price but the 2 stars given by the other opinion made me boost mine. This tool DOES include the quick change - there is a different lesser model that does not but this model does. This made quick work of cutting some drywall that would have been a royal PIA to cut with other means given that it was already hung and I needed to cut the drywall all the way into the back corner which would be impossible with almost any other tool - so I'd have had to get it out with a chisel - in my bizarre situation there was also metal corner bead in the inside corner again no problem for this tool and would have been nearly impossible any other way.
I also had a job where I needed to cut some base molding that was already up and installed - again piece of cake for this guy very difficult with other tools.
Cons - (other than price) it was a bit noisier than I thought it would be - but not bad.

Click Here to see more reviews about: Fein MultiMaster 250 Start Power Sanding and Scraping/Cutting Tool

Designed for beginners who do not want to sacrifice professionalism for affordability, the Fein MultiMaster FMM 250 Start is a multi-purpose system for interior fitting and renovation. This convenient package gives you the high-quality tools and accessories that you need to take on a wide range of home and hobby projects, from floor and tile work to renovating windows and cabinetry.
The easy-to-use FMM 250 Start includes a range of high-quality accessories, including a universal E-Cut blade, sanding pad, sanding sheets, rigid scraping blade, and key and mounting bolts.

Whether you are finishing up your child's woodworking project, or getting your hands dirty with your first renovation project, the Fein MultiMaster FMM 250 Start offers the performance and accessories you'll need to get the job done cost-effectively without sacrificing performance.

Versatile, High-Precision Specialist Tool This system features the FMM 250, a versatile, high-precision specialist tool that's perfect for professional outfitting, renovation, and repair work. Its lightweight, ergonomical design and powerful 250-watt motor with electronic speed control make the FMM 250 ideal for sanding in tight corners. Developed as a result of Fein's 40-year experience with oscillation technology, the FMM 250 boasts 12,000 to 21,000 oscillations per minute and has a 16.4-foot length cord.

Universal E-Cut Blade For Base and Flooring Work The FMM 250 comes with several high-quality accessories, including one Fein 63502151018 Universal E-Cut Blade that's great for doorjambs, baseboards, baseboards, toe kicks, and flooring work. It's also perfect for wood, plaster, drywall, and synthetic and plastic materials. This blade features a finer tooth pattern for more control and longer blade life, and a flush cut design that allows for completely perpendicular cuts to flooring tight areas.

For tough jobs like lifting linoleum, carpet, adhesive residue, scale, paint, and tape, choose the Fein 63903178017 Rigid Scraper Blade, which can be re-sharpened for longer blade life. Finally, ensure a smooth finish with the aluminum backed Fein 63806129026 Sanding Pad. The hook and loop design allows for grit switching in the middle of a job.

The FMM 250 Start comes with a one-year warranty.

Click here for more information about Fein MultiMaster 250 Start Power Sanding and Scraping/Cutting Tool

Read More...

Fein MultiMaster FMM 250Q Select Variable-Speed Sanding and Scraping/Cutting Tool Review

Average Reviews:

(More customer reviews)This company makes first class made tools. There appear to be no short cuts on quality. This is the third generation of this tool that I am aware of - first tool 150watts - second 180w -- this and third 250w. This tool is very powerful and smooth. Still my favorite is the first 636-1. It is well powered, smaller and super smooth. This model has a wonderful blade change system ( non slip blade mount) like some of their higher priced tools. The usefulness and operation of this system have always been phenomenal! The newer tools are more powerful but the original tool has no trouble performing any job and causes a lot less body fatigue - that is why it is my favorite. I own the first and the latest generation of this tool.

Click Here to see more reviews about: Fein MultiMaster FMM 250Q Select Variable-Speed Sanding and Scraping/Cutting Tool

Designed to help you complete both professional jobs and hobby projects, the Fein MultiMaster FMM 250Q Select is a multi-purpose system for interior fitting and renovation. This all-round package gives you the professional tools and accessories that you need to take on a wide range of hobbies, and interior fittings and renovation projects -- from floor and tile work to renovating windows and cabinetry. It includes the MultiMaster FMM 250Q, featuring the tool-free QuickIN rapid clamping system that lets you change out accessories quickly while you're on the job.


The easy-to-use FMM 250Q tool comes complete with a wide range of efficient accessories, including a universal E-cut blade, carbide tipped segment saw blade, HSS segmented blade, rigid scraper blade, and sanding pad.

Whether you are installing new tile in a bathroom, trimming new windows and doors for your addition, or finishing up your child's school woodworking project, the Fein MultiMaster FMM 250Q Top offers the performance and accessories you'll need to get the job done quickly and professionally.

Versatile, High-Precision Specialist Tool This system features the FMM 250Q, a versatile, high-precision specialist tool that's perfect for professional outfitting, renovation, and repair work. Its lightweight, ergonomic design, and powerful 250-watt motor with electronic speed control, makes the FMM 250Q ideal for sanding in tight corners.

This versatile and powerful tool features the tool-free QuickIN rapid clamping system, which means that you can change out your accessories quickly and easily without having to slow down your progress by fumbling for tools. Developed as a result of Fein's 40-year experience with oscillation technology, the FMM 250Q boasts 12,000 to 21,000 oscillations per minute and includes a 16.4-foot cord.

Universal E-Cut Blade For Base and Flooring Work The FMM 250Q comes with several high-quality accessories, including one Fein 63502151018 Universal E-Cut Blade that's great for doorjambs, baseboards, baseboards, toe kicks, and flooring work. It's also perfect for wood, plaster, drywall, and synthetic and plastic materials. This blade features a finer tooth pattern for more control and longer blade life, and a flush cut design that allows for completely perpendicular cuts to flooring tight areas.

Rigid Scraper and Segmented Blades For Tough Jobs For tough jobs like lifting linoleum, carpet, adhesive residue, scale, paint, and tape, choose the Fein 63903178017 Rigid Scraper Blade, which can be re-sharpened for longer blade life. This system also includes the efficient Fein 63502106015 HSS Segmented Blade for fiberglass, carbon fiber, 20 gauge sheet metal, and harder woods. Segmented to cut right angles without over cutting, this flat, high-speed steel blade performs straight cutting in harder material, and can cut into corners with right angles.

There's also one Fein 63502118016 Carbide-Tip Blade for cutting out damaged tile joints and for carving out grooves in plaster, porous concrete and similar construction materials. And an aluminum backed Fein 63806129026 Sanding Pad helps ensure a smooth finish to all your projects.

The FMM 250Q Select comes with a one-year warranty.

Get 46% OFF

Click here for more information about Fein MultiMaster FMM 250Q Select Variable-Speed Sanding and Scraping/Cutting Tool

Read More...

Fein FMM 250Q Select Plus MultiMaster Oscillating Detail Sander Tool Kit Review

Average Reviews:

(More customer reviews)I didn't even know this tools existed until I saw the infomercial on TV. I install interior carpentry for a living and really sat up on the couch when I saw how easily it cuts existing baseboard and door casing without tearing up the wall or beating it up with a chisel. However, I couldn't justify the obscenely high price of the Fein for a tool I thought I would rarely use, so I bought a cheap knock off version just to test it's versatility. In the one week that I had the El Cheapo before it quit, I used it to cleanly cut fascia board, T&G flooring, T-111 siding, and casing. It seemed like every time I turned around I found a new use for it. OK, now I was convinced I couldn't live without one, time to upgrade. After checking the reviews and actually handling the competitions versions at HD and Lowes, I decided to go for it get the Fein. Hands down this tool looks and feels way better than anything else I checked out. The quick blade change feature on the Fein helps justify the price, as my other tool required frequent stopping and tightening with an allen wrench. So far it has performed smoothly and competently. On the other hand I was really shocked at how cheap and flimsy the case is. What where they thinking when they designed that thing? For a couple bucks they could have designed a case more worthy of the tool. I'm used to the rugged Dewalt cases you get everytime you buy one of their tools. The price of the Fein replacement blades is also off the scale. I suggest you try Versa-Tool brand which are a good quality blade at 1/3 the price. Overall, I am pleased with the tool itself, and know from past expierence that the sting of the high price will fade over time if the tool holds up as expected.

Click Here to see more reviews about: Fein FMM 250Q Select Plus MultiMaster Oscillating Detail Sander Tool Kit

Designed to help you complete both professional jobs and hobby projects, the Fein MultiMaster FMM 250Q Select Plus is a multipurpose system for interior fitting and renovation. This all-round package gives you the professional tools and accessories that you need to take on a wide range of hobbies, and interior fittings and renovation projects--from floor and tile work to renovating windows and cabinetry. It includes the MultiMaster FMM 250Q, featuring the tool-free QuickIN rapid clamping system that lets you change out accessories quickly while you're on the job, and a sturdy plastic case.

The easy-to-use FMM 250Q tool comes complete with a wide range of efficient accessories, including a universal E-cut blade, carbide tipped segment saw blade, HSS segmented blade, rigid scraper blade, and sanding pad.

Whether you are installing new tile in a bathroom, trimming new windows and doors for your addition, or finishing up your child's school woodworking project, the Fein MultiMaster FMM 250Q Top Plus offers the performance and accessories you'll need to get the job done quickly and professionally.

Versatile, High-Precision Specialist ToolThis system features the FMM 250Q, a versatile, high-precision specialist tool that's perfect for professional outfitting, renovation, and repair work. Its lightweight, ergonomic design, and powerful 250-watt motor with electronic speed control, makes the FMM 250Q ideal for sanding in tight corners.

This versatile and powerful tool features the tool-free QuickIN rapid clamping system, which means that you can change out your accessories quickly and easily without having to slow down your progress by fumbling for tools. Developed as a result of Fein's 40-year experience with oscillation technology, the FMM 250Q boasts 12,000 to 21,000 oscillations per minute and includes a 16.4-foot cord.

Universal E-Cut Blade For Base and Flooring WorkThe FMM 250Q comes with several high-quality accessories, including one Fein 63502152010 Universal E-Cut Blade and Fein 63502134015 Standard E-Cut Blade that are great for doorjambs, baseboards, baseboards, toe kicks, and flooring work. It's also perfect for wood, plaster, drywall, and synthetic and plastic materials. This blade features a finer tooth pattern for more control and longer blade life, and a flush cut design that allows for completely perpendicular cuts to flooring tight areas.

Rigid Scraper and Segmented Blades For Tough Jobs For tough jobs like lifting linoleum, carpet, adhesive residue, scale, paint, and tape, choose the Fein 63903178017 Rigid Scraper Blade, which can be re-sharpened for longer blade life. This system also includes the efficient Fein 63502106015 HSS Segmented Blade for fiberglass, carbon fiber, 20 gauge sheet metal, and harder woods. Segmented to cut right angles without over cutting, this flat, high-speed steel blade performs straight cutting in harder material, and can cut into corners with right angles.

There's also one Fein 63502118016 Carbide-Tip Blade for cutting out damaged tile joints and for carving out grooves in plaster, porous concrete and similar construction materials. And an aluminum backed Fein 63806129026 Sanding Pad helps ensure a smooth finish to all your projects.

The FMM 250Q Select Plus comes with a one-year warranty. Two additional years are included with product registration.

Get 20% OFF

Click here for more information about Fein FMM 250Q Select Plus MultiMaster Oscillating Detail Sander Tool Kit

Read More...

Rockwell RK5107K SoniCrafter 73-Piece Complete Professional Kit Review

Average Reviews:

(More customer reviews)Thank you Rockwell....I have been doing carpentry for about 12 years and can not believe I didn't get this tool sooner. I have had this tool for about a month and it has paid for itself ten times over. The Wood/Metal blade I have used for cutting out large areas of Sheetrock to get to leaking pipes without cutting them or wires. I put in two solid oak floor and used it for molding cuts and door jam cuts. I just did a new kitchen install in an old house and it was used for many tight spots where no other tool could get to. I also used it to put in the oven vent inside and then cut the old siding and nails to make the vent cap fit nice without having to replace any old siding boards which usually break when prying with a flat bar and cutting the nails with a big sawzaw. I highly recommend this tool. The price is great and the blades last longer than I thought, once you figure out how to use them for the right job. Just let the tool do the work. If you rush though it will take longer to cut, or if the pipe or nail is not in a fixed position and is loose try to steady it first for best results. O it also cuts though Pvc pipe great. Also thanks to Amazon business Prime account with free two day delivery. for a mere 3.99 I had it the next day.I have saved hundreds on delivery charges over the last year. Just showing some props to Amazon...Get their Prime account for a low price and get FREE two day shipping year round....And buy the Sonicrafter Kit, its well worth it.....

Click Here to see more reviews about: Rockwell RK5107K SoniCrafter 73-Piece Complete Professional Kit

Giving you the ability to sand, polish, scrape, and cut a wide variety of materials, the Rockwell RK5107K Sonicrafter 73-piece Complete Professional Kit is your all-in-one tool kit for carpentry work. Enhanced by 72 accessories, the variable-speed tool operates with microsonic high-frequency oscillation to produce smooth, safe movements without kickback. Ideal on the job site or around the house, this efficient tool boasts a slim body that makes it ideal for working in confined spaces.


Whether you're a professional woodworker or an avid do-it-yourselfer, the RK5107K is an effective way to streamline your work. Easily carried in its compact, lightweight case, the kit can be kept at your fingertips for all your remodeling, installation, and repair projects.

Starting with the basics, the 73-piece multipurpose kit comes with a variable speed tool and includes three cutting blades, a carbide grit blade, a finger-sanding pad, 30 finger sanding sheets, a triangular sanding pad, 30 triangular sanding sheets, and one polishing pad that helps you cut, remove grout, and sand, with professional-grade results. It also includes a tough, broad-spectrum scraper, a triangular carbide grit rasp, a vacuum adapter with single universal coupling, and a hex key.

Sprucing up the garage? Utilize the scraper attachment to remove paint, old caulking, and rust. Remodeling the bathroom? Remove grout with the kit's carbide grit blade and score ceramic tiling for shaping with the optional diamond grit blade. Exposing hardwood? Remove carpeting using the broad spectrum scraping blade then let the sanding system take over to polish those hard-to-reach spaces.

High-Frequency Oscillation for Smooth, Safe PrecisionFor the safest and most accurate work, the RK5107K features super high-frequency oscillation technology. This means that instead of rotating, it makes up to 20,000 back-and-forth oscillations per minute for ultra smooth, efficient results. Because there are no fast-spinning parts or alternating blades, there are no threats of kickback.

Thanks to its advanced design, the RK5107K cuts only hard materials when fitted with a blade attachment. This way, the tool easily cuts heavy-duty materials, while keeping the user's hands and fingers safe.

The RK5107K can cut wood, thin metals, fiberglass, masonry, plastic, carpet and flooring, cement board, and even vinyl siding.

High Sanding Capacity with Low Dust LevelsFor sanding jobs, this tool requires very little downward pressure and delivers great accuracy. And its slim body enhances your sanding capabilities, allowing you to work on edging and corners that are often not possible to reach with other tools. Plus, it affords you quick and easy clean-up, throwing a very low level of dust whether you're sanding, cutting, or scraping.

Easy Handling with Lightweight Frame and Soft GripThe RK5107K has magnesium alloy gear housing, making it lightweight enough for extended use and rugged enough for long-term durability. The soft, ergonomic grip offers you optimum comfort and control while you tackle the job at hand.

What's in the BoxRockwell RK5107K variable speed Sonicrafter tool, 3 cutting blades (2 universal end cut blades and HSS semicircle saw blade), 1 carbide grit blade, 1 broad spectrum scraping blade, 1 triangular carbide rasp, 1 polishing pad, 1 finger sanding pad, 30 finger sanding sheets, 1 triangular sanding pad, 30 triangular sanding sheets, 1 hex key, 1 dust extraction adapter, and a convenient carry case.

Get 32% OFF

Click here for more information about Rockwell RK5107K SoniCrafter 73-Piece Complete Professional Kit

Read More...

Bosch PS50-2B 12-Volt Max Multi-X Carpenter Kit Review

Average Reviews:

(More customer reviews)This bosch multi-x use tool is exactly that. I do remodeling/ finishing/framing and light cabinet building on site and install. This tool has been used much more than I had originally thought. I've used it for drywall cutting(it makes very nice straight cuts with relatively little dust flying everywhere). I've used it for flush cutting, it will cut through a 2x4 if needed. It works great where it's to hard or awkward to use a sawzall. The detail sanding pad works great and is very nice for tight spaces or small areas. I wish there was a vaccum attachment for this though...?

Also the blades are very nice and are quite durable. I'm anxious to see bosch release their own blades/attachments soon. (A rep just said that they should be released next week. Dec 8th? ) Also he said they would be priced from 10-40% LESS then the compareable Fein attachments!! Thats about time.

Another thing. I tried to use the new Dremel's sandpaper on the bosch, but the Dremel's sandpaper are too small. They don't work well at all. I think the Dremel's other attachments will work fine though.
I think i would actually give this a 4.5 star if i could because there are a few shortcomings.
1. The battery life is short. maybe 5-10 minutes depending on how hard you're pushing this tool and how high the variable speed is. Also when maxed out, this tool does make a good amount of noise and has some vibration. I've used it often dialed about halfway up. Its quieter and less agressive but usually plenty of power. Also, a bosch Rep told me that the 12 volt max batteries are exactly the same as their 10.8 volt. I just picked up the 10.8 volt impact driver because i needed more batteries to keep this tool running. They are interchangeable and seem to work perfectly the same. I think that the battery option and freedom of cords far outweigh the downside of short battery life. (As long as you have more than 2 batteries!!!)
2. My multi-x has a hard to turn off switch. It may just be mine, because in the store the floor model was just fine.. But its bothersome.
( I bought mine in a store. )
To summerize this, I am very happy with my purchase and can't believe how i did certain things before having this handy tool. If you're serious about being efficient on the job, and are looking for a new favorite tool, you can't go wrong here.
***EDIT*** I would definately not go more than 4 Stars due to the battery life issues and no charge in cold weather. I may be looking to the Fein Multi master Top kit down the road....

Click Here to see more reviews about: Bosch PS50-2B 12-Volt Max Multi-X Carpenter Kit

The Bosch PS50-2B 12-Volt Max Multi-X Carpenter Kit includes a powerful, efficient multipurpose tool and a range of accessories for versatility, flexibility, and professional performance. This kit includes batteries, a charger, and a selection of cutting blades, so you're ready to take on heavy-duty cutting, sanding, and grinding jobs right out of the box--without sacrificing speed or comfort.
12-Volt Litheon Batteries for Long-Lasting PowerThe PS50-2B uses 12-Volt Max Litheon batteries with unmatched battery runtime and a 400-percent-longer lifetime than traditional lithium-ion batteries. In fact, two battery packs should allow you to perform primary applications without down-time. Litheon batteries are the most advanced lithium-ion batteries available today. They allow more battery charges and provide longer runtime without memory effect--meaning the batteries do not need to be empty before charging. The batteries can also be taken out of the charger before charging is complete.
Other benefits include: significantly less self discharge; electronic cell protection that guards against overheating, overload, and deep discharge; and no loss of power from the first to last screw or hole. Best of all, these batteries will fully charge in 30 minutes and will be at 85% capacity in just 15 minutes.
Handles a Range of Applications and Materials for True VersatilityVersatile and flexible, the PS50-2B offers corded performance for cutting, sanding, and a range of other tasks. It's suitable for use with soft wood, hardwood, metal, drywall, and plastic, and it creates less dust than most other sanders. For added convenience, when used with the adaptor, it's compatible with most accessories.
Compact, Well-Balanced Design for Easy HandlingMeasuring just 10.9 by 2.32 inches (LxH) and weighing only 2.12 pounds, the PS50-2B easily fits in tight spaces and corners when sanding or cutting. The plastic nose prevents marks on work pieces, and the ergonomic design with small perimeter and front soft-grip provides comfortable handling, even if the tool grows warm.
Variable Speed and Angle Adjustment for Superior ControlThe PS50-2B provides a speed range from 5,000 to 20,000 RPM that's controlled by a variable-speed dial for quick and easy speed adjustments while you're sanding.
And, for precise results, the tool holder provides variable-angle adjustment within 240 degrees.
Innovative Features for User-Friendly OperationThe PS50-2B offers a range of helpful features to keep your work going smoothly from start to finish. First, a cutting-depth scale clearly indicates cutting depth, while a flush-cutting mechanism allows you to work flush for precise angle cuts. Second, Bosch's patented play-free drive system provides precision and optimal force transmission. Third, a hole pattern lets you set the blade in 30-degree increments for optimum ergonomics. Finally, optimized tooth geometry with large gullets ensures clean cuts in the hardest of woods.
And because the PS50-2B is cordless, you can take it anywhere. With a fuel gauge that lets you know when it's time to recharge, this tool is ready when you are.
ProVantage GuaranteeThe PS50-2B comes with the ProVantage three-year protection plan, which guarantees two years of battery protection and one year of tool protection. Under this plan, you can receive two years of free battery replacements, tool replacement for one year, and a free tool repair package for the second and third years.
What's in the BoxPS50-2B; carrying case; two Litheon 12V Max batteries; 30-minute charger; one adapter; one sanding plate; one sanding paper pad; one HCS plunge-cut blade (1-5/8 x 1-1/2 inches); three HCS plunge cut blade (3/8 x 1-1/4 inches); and one BIM segment blade (3-1/2 x 7/8 inch).

Get 55% OFF

Click here for more information about Bosch PS50-2B 12-Volt Max Multi-X Carpenter Kit

Read More...

Rockwell RK5102K SoniCrafter Deluxe 72-Piece Kit Review

Average Reviews:

(More customer reviews)OMG, the Rockewell SoniCrafter is great. I was looking for a corded oscillating tool and looked at the Fein Multitasker and blades, but it is just way too expensive to purchase for my needs. So I bought the Dremel and the Rockwell to compare side by side...
The $100 Dremel is lighter and a bit smaller but the buzz the motor makes compared to the Rockwell motor [a little bit heavier and slightly bigger] which humms smoothly is like comparing a Vespa scooter to a Victory street bike.
Since the basic Rockwell is only $20 more than the Dremel and the extra blades are about the same price, there was no question about going for the quality/durability of a Rockwell.
The only convenience problem that I can foresee is getting replacement blades:
Dremel is carried by big box hardware stores; hobbyists who do crafts on the spur of the moment and do not need to rip open walls, will appreciate the around-the-corner convenience.
Rockwell is carried by speciality woodworking stores or the internet; the Home Proj. kind of guys have to plan ahead before ripping into a wall for remodeling. So ordering parts in advance should be a no brainer.
I also really liked the Rockwell case, it is created with niches and screw-downs to hold lots of blades/attachments in place.
I looked at the Bosch 12v battery operated version, and that would have been a good choice but I do not want to have numerous 18v tool systems and chargers for the various power hand tools that I use. I read that the Bosch delivers 20 min of battery power and I might need more time than that between charges.
All four tools mentioned above have variable speeds pretty much the same: 10,000 - 21,000 opm. The Bosch details that I read boasted of 5,000 - 20,000 opm, but I do not know if I need to go that slow. If I did I would have researched more into the rare Praxon version of oscillating tool, which is reportedly underpowered and equivalent to size and weight of the Dremel.


Click Here to see more reviews about: Rockwell RK5102K SoniCrafter Deluxe 72-Piece Kit

Giving you the ability to sand, polish, scrape, and cut a wide variety of materials, the Rockwell RK5102K Sonicrafter Deluxe 72-piece Kit is your all-in-one tool kit for carpentry work. Enhanced by 71 accessories, the variable-speed tool operates with microsonic high-frequency oscillation to produce smooth, safe movements without kickback. Ideal on the job site or around the house, this efficient tool boasts a slim body that makes it ideal for working in confined spaces.
A Complete Workshop in One Versatile ToolWhether you're a professional woodworker or an avid do-it-yourselfer, the RK5102K is an effective way to streamline your work. Easily carried in its compact, lightweight bag, the kit can be kept at your fingertips for all your remodeling, installation, and repair projects.

Starting with the basics, the 72-piece multipurpose kit comes with a variable speed tool and includes two cutting blades, a carbide grit blade, a finger-sanding pad, 30 finger sanding sheets, a triangular sanding pad, 30 triangular sanding sheets, two polishing pads that help you cut, remove grout, and sand, with professional-grade results. It also includes a tough, broad-spectrum scraper, a triangular carbide grit rasp, a vacuum adaptor, and a hex key.

Sprucing up the garage? Utilize the scraper attachment to remove paint, old caulking, and rust. Remodeling the bathroom? Remove grout with the kit's carbide grit blade and score ceramic tiling for shaping with the optional diamond grit blade. Exposing hardwood? Remove carpeting using the broad spectrum scraping blade then let the sanding system take over to polish those hard-to-reach spaces.

High-Frequency Oscillation for Smooth, Safe PrecisionFor the safest and most accurate work, the RK5102K features super high-frequency oscillation technology. This means that instead of rotating, it makes up to 20,000 back-and-forth oscillations per minute for ultra smooth, efficient results. Because there are no fast-spinning parts or alternating blades, there are no threats of kickback.

Thanks to its advanced design, the RK5102K cuts only hard materials when fitted with a blade attachment. This way, the tool easily cuts heavy-duty materials, while keeping the user's hands and fingers safe.

The RK5102K can cut wood, thin metals, fiberglass, masonry, plastic, carpet and flooring, cement board, and even vinyl siding.

High Sanding Capacity with Low Dust LevelsFor sanding jobs, this tool requires very little downward pressure and delivers great accuracy. And its slim body enhances your sanding capabilities, allowing you to work on edging and corners that are often not possible to reach with other tools. Plus, it affords you quick and easy clean-up, throwing a very low level of dust whether you're sanding, cutting, or scraping.

Easy Handling with Lightweight Frame and Soft GripThe RK5102K has magnesium alloy gear housing, making it lightweight enough for extended use and rugged enough for long-term durability. The soft, ergonomic grip offers you optimum comfort and control while you tackle the job at hand.

What's in the BoxRockwell RK5102K variable speed Sonicrafter tool, 2 cutting blades (universal end cut blade and HSS semicircle saw blade), 1 carbide grit blade, 1 broad spectrum scraping blade, 1 triangular carbide rasp, 2 polishing pads, 1 finger sanding pad, 30 finger sanding sheets, 1 triangular sanding pad, 30 triangular sanding sheets, 1 hex key, 1 dust extraction adapter and a convenient carry bag.

Get 15% OFF

Click here for more information about Rockwell RK5102K SoniCrafter Deluxe 72-Piece Kit

Read More...