Average Reviews:
(More customer reviews)Got the tool for Christmas. Needed it for undercutting baseboard as well as cut aluminum from my front door frame to fit in my new front-door threshold. As some of the other folks in these reviews, the tool wood-cutting bit kept on coming loose. I was afraid of tightening it too much, but after it came loose again-and-again after about 5 minutes of use I decided to tighten it until could feel the motor turning. This time it did not come loose as easily but I am not sure how long it will handle this - so far so good. It does however still come loose when I hit a hard spot, like when I encounter a nail or when it touched the cement floor when cutting the baseboard or if you force it - let the tool do the work.
If you want a tool that you can force and use for hours on end, you need to consider another, and needless to say a considerably more expensive tool. It is good value for money, and if you - like me - undercut lots of baseboard manually with a jam saw before you got this tool, you will find this tool a great time-saver and an absolute pleasure to use.
Just as side note I have only used the wood and wood-metal bits and have not used it to cut pipes, grout, etc, just used it to cut a small notch out of an aluminum door frame and the baseboards. I did use it to trim the edge of a custom-cut laminate flooring piece as I was too lazy to use the circular saw and it burns the wood but it did manage to trim 1mm off of it none the less.
Pros: Lightweight, relatively inexpensive, easy to use, great time-saver over manually cutting door-jams.
Cons: Thick (solid-wood) stair jams (not sure what this is called, the wood trim on either side of my stairs that run all the way down the stairs and meet the concrete floor where I installed the laminate flooring and had to undercut the wood trim to slide the laminate underneath, about 2in thick solid wood) took a while to cut and burns the wood with smoke pouring out of the wood (probably other oscillating tools will do the same), the heat that comes from the tool after about 5 minutes of continuous cutting is excessive, the bit that comes loose again-and-again is my biggest concern as now that I tighten it real good (until I can feel the motor turning) am not sure how long it will last before something strips or breaks but since it still holds have to give it the benefit of the doubt, the casing it comes in is very cheap, the custom bits are expensive (like the sander).
Click Here to see more reviews about:
Dremel 6300-03 120-Volt Multi-Max Oscillating KitMake multitasking easier and more productive with the Dremel 6300-03 Multi-Max Oscillating Tool Kit. Ideal for industrial/contractor use, this kit can help you tackle a wide variety of repair, remodeling, and restoration projects. The Multi-Max offers optimal control, safe operation, and high precision--all while creating minimal dust--making it ideal for industrial cutting, grout removal, grinding, sanding, scraping, and much more.
The kit includes everything you need to tackle many different projects. View larger.Ideal for Cutting, Grout Removal, and ScrapingThe Multi-Max comes with a range of accessories that allow you to complete a wide variety of cutting, grout removal, and scraping applications. To start, the kit includes one 1/8-inch grout removal blade, ideal for wall and floor grout elimination. The blade's carbide grit quickly and neatly removes old grout, and its 90-degree edge allows access in corners.
The Multi-Max Kit also comes with two 3/4-inch wood/metal flush-cut blades featuring Bi-Metal teeth for strength when cutting non-ferrous metal and wood. The kit also includes a 3/4-inch wood flush-cut blade that has a 1-1/4-inch depth of cut and is perfect for flush or plunge cutting in wood, plastic, drywall, and other soft materials. Additionally, the kit comes with a drywall/soft wood blade that neatly plunges and cuts and is great for longer straight cuts.
The Multi-Max even has a rigid scraper blade, which is best-suited for removing stuck vinyl flooring, carpeting, and carpet padding. It has a scraping edge on three sides and is offset for flush surface scraping.
Compact Design for Easy Handling in Tight CornersLightweight and compact, the Multi-Max is a pleasure to handle and hold. Its comfortable design minimizes wrist and hand fatigue, even during intricate, prolonged work. It also accesses tight corners and narrow spaces that conventional saws and sanders simply can't reach.
Easy to Operate and StoreOperating the Multi-Max is easy, low-noise, and reliable. Simply plug it in and you're ready to go. The Multi-Max comes in a blow-molded case for easy storage and portability. And with a long, 10-foot cord, you won't have to worry about getting tangled up in cumbersome extension cords.
About Dremel: A History of Brilliance and InnovationFounded in 1932 in Racine, Wisconsin, Dremel is the industry leader in rotary tools. The company owes its success to the inventive genius of its founder and namesake, Albert J. Dremel. In his lifetime, Mr. Dremel owned 55 patents on a wide range of products from electric erasers to a gas-powered rotary lawn mower. His most famous and important invention was a high-speed rotary tool dubbed the Dremel Moto-Tool. Compact, lightweight, and perfect for a wide range of jobs, the rotary tool was an immediate hit with hobbyists and eventually became accepted as one of the greatest inventions of the 20th century. Today, the Dremel name remains synonymous with utility, durability, and innovation.
What's in the BoxOscillating tool; MM600 rigid scraper blade; MM440 3/4-inch wood flush cut blade; MM500 1/8-inch grout removal blade; MM450 wood and drywall blade; two MM422 3/4-inch wood/metal flush cut blades; hard storage case; and Getting Started booklet.
Get 58% OFF
Click here for more information about Dremel 6300-03 120-Volt Multi-Max Oscillating Kit
